Danby Pro Quick Start Manual

The Dandy Pro Can be used with both Corded Drills, Cordless Drills and Impact Drivers with
3/8" or 10mm Drill Chucks or standard 1/4" or 6mm Impact Driver Chucks.
General Recommendations
1 Recommended drill speed: 1800 - 2500 rpm.
2 Wipe any solvent spillage off Dandy attachments immediately.
3 Cleaning Brushes - Lower the brush and attachment into a bucket deep enough to contain all spray during
spinning. The top of the brush attachment should be at least 8cm below the rim of the bucket during
spinning.
Cleaning Rollers - Lower the roller sleeve and attachment into a bucket deep enough to contain all spray
during spinning. The top of the roller sleeve should be at least 10cm below the rim of the bucket during
spinning.
4 Solvents should be used in accordance with manufacturers instructions.
5 If the brush handle shape is such that there is no definite point of grip or the brush handle does not appear
to be held tightly it will be helpful to wrap some masking tape around the handle where the jaws locate to
assist grip.
Important Safety Notes
1 Usual precautions should be taken when using electrical tools in the vicinity of liquids.
2 To avoid electric shocks ensure hands and drill are dry. Switch off electrical supply immediately if the drill
becomes wet.
3 If equipment vibrates in use switch off the electrical supply immediately and ensure that the brush or roller
sleeve is located correctly in attachment.
4 If using solvents or paints which irritate the skin or eyes or which may cause other damage, use appropriate
protective equipment.
5 A cardboard box can also be used to spin the paint brush or roller sleeve in Place a plastic bin liner around
the outside of the box - do not use it inside the box as it will wrap around the tool when spinning. Spin as
above.
Dandy Decorating products carry a TWO YEAR WARRANTY against defective
workmanship and materials. Should your Dandy product fail please contact us at the
address below.
Dandy Tools Ltd 7 Islay Gardens
Tel 0044 2392 161154 email sales@dandytools.com
www.dandytools.com
This guarantee is offered in addition to and does not diminish your statutory rights
Please note the products are guaranteed for normal use but NOT against misuse.
DANDY
All Dandy Products are protected by International Patents.
WARRANTY
, Portsmouth, Hampshire PO6 3UF England
DANDY Pro
Paint Brush & Roller Cleaner
The Dandy Pro Can be used with Corded Drills. Cordless Drills and Impact Drivers