Tilting The Kickback For Rebounding; How To Adjust The Goal Angle For In Air Rebounding - EZ Goal 63074 W Aassembly Instructions

Tilting the Kickback for Rebounding

Your goal can be adjusted to various angle for different games.
Note:
1. Remove the bottom pull pin before adjusting. See Detail D.
2. Do not tilt Goal forward. Can cause injury.
DETAIL D

How to adjust the goal angle for in air Rebounding.

You can adjust the angle of your goal by adjusting Side Bar.
Pull both bottom folding pull pins out before Adjusting side bars. Store
pull pins on folding sections front extra holes.
1. Push the middle Button in, twist the bar to Right.
2. Do the same with the other Side bar.
3. Adjust the tilting Angle.
4. Twist both bars back to the Left, relocate buttons in holes.
Pull the pull pins out
of Folding section
before adjusting s ide
bars for tilting. Pins
will not go back in
while rebounder is
tilted.
63074 english 07 29 16 Rev1
Figure 10
Adjusting Throwback
1 2
Button In Twist Right
Customer Service:
9
Do not tilt
Goal forward.
4
3
Tilt Throwback Twist Left
Figure 11
Service@ezgoal.net
or
203 591 9032