Tpms - BAIC D50 Series User Manual

160 Tire pressure monitoring system
General description
This vehicle use the indirect tire pressure
monitoring system, through wheel speed signal
received by ESP indirectly monitors whether the
3
tire pressure is normal or not. And display alarm
info through the computer display screen
When a single or multiple tire pressure is
abnormal, and failure of tire pressure system,
ESP will send an alarm signal. And through the
instrument display on the computer display
screen. After the car starts, the tire pressure
monitoring system will automatically enter the
normal operating mode
D50
Tire Pressure Information
Instrument)*
When all tire pressures are normal, the
instrument has no tire pressure info display.
When one or more tires have abnormal pressure,
tire pressure monitoring
Alarm light is on, the display screen shows a car,
and the corresponding faulty tire flashes and
buzzes 5 times. When the tire pressure
monitoring system is abnormal, and tire
pressure cannot be monitored, the tire pressure
monitoring alarm lamp first with 1Hz frequency,
Scintillate for 60 seconds, then stay light and
buzz for 5 times. When the signal of tire
pressure monitoring system is lost, the display
screen has no tire pressure info and the tire
pressure monitoring alarm lamp will scintillate
with 1Hz Frequency.
(5-inch
Tire pressure reset
When tire pressure display is abnormal, the user
must choose safe area nearby to stop and check
the tire. If conditions permit, it is recommended
to measure tire pressure to determine faults
(when tires leak slowly, its difficult find only by
eyes) after troubleshooting, tire pressure reset
should be carried out through the following
operations.
1. Keep press (≥ 1.5 seconds) "INFO" key the
tire pressure display on the instrument display
screen and the tire pressure monitoring alarm
lamp flash with the frequency of 0.5Hz at the
same time.
2. Press the "RESET" key to send a reset
request to the tire pressure system. The tire
pressure on the instrument display screen is not
displayed, and the tire pressure monitoring
alarm lamp will keep flickering at 0.5Hz
frequency.
3. After about 4 seconds, the tire pressure
display on the instrument display screen and the
tire pressure monitoring alarm lamp will stop
flickering ， If the tire pressure display on the
instrument display screen and the alarm lamp
for tire pressure information are extinguished
after the flicker stops, the tire pressure reset will
be successful.