CAME BPT TH/550 Installation And Use Manual page 50

Press the button to bring up the screen
in figure C.
Use the
(in hours) of the timed manual program
remotely.
Press the
next parameter to be configured.
C
Window contact
(only on battery-powered model)
If you have chosen to connect a window
contact D (
, you can set it so that the thermal zone is
turned off thirty seconds after the window
in which the contact is fitted is opened.
D
Note. When the window is closed again,
the thermal zone goes back to the mode
prior to its activation.
Press the
next parameter to be configured.
Screen backlighting
(only on mains-powered model)
Using the
whether the backlighting should always
be on (ON) or only when the display is
touched.
Press the
E
next parameter to be configured.
arrows to set the duration
button to move on to the
) to the terminals
button to move on to the
arrows E, choose
button to move on to the