Table of Contents
Advertisement
BEST PRACTICES
CAMERA STOPS TAKING IMAGES OR WON'T TAKE IMAGES
1. Please make sure that the SD card is not full. If the SD card is full,
the camera will stop taking images. Users can turn on SD Loop to
avoid such problems.
2. Make sure that alkaline or NiMH-AA batteries have enough power
for the camera to work.
3. Make sure that the camera power switch is in the "On" position and
not in the "Off" or "Setup" mode.
4. Format the SD card with the camera before using or when the
camera stops taking images.
NIGHT VISION FLASH RANGE DOESN'T MEET EXPECTATION
1. Please check to make sure that batteries are fully charged
2. "Max Range" offers better IR flash range. Given IR flash range
values are based on max range setting; so please adjust Night
Mode to Max Range for better night vision flash range
3. High quality 1.2V NiMH rechargeable AA batteries can also offer
improved IR flash range. Alkaline batteries cannot deliver enough
wattage to power the illuminator consistently at night.
4. Certain surroundings (like trees, walls, ground, etc.) within flash
range can deliver you better night time images; to improve night
images do not aim camera in an open field where there is nothing to
reflect the IR flash back; its like shining a flashlight into the sky at
night, you can't see anything.
14
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the REVEAL X and is the answer not in the manual?
Questions and answers
formatting sd card
To format the SD card for the Tactacam REVEAL X, follow these steps:
1. Insert the SD card into the camera.
2. If prompted, confirm that the camera recognizes the SD card.
3. If no prompt appears, turn off the camera, reinsert the SD card, and turn it back on.
4. Navigate to the camera's menu (press the menu button, often marked with three lines or a gear icon).
5. Look for an option like "Format SD Card," "Delete All," or "Clear Memory" (wording may vary).
6. Select this option and confirm when prompted (e.g., select "Yes").
7. The camera will erase all data on the SD card, so ensure you have backed up important files.
8. Once formatting is complete, check the available space to confirm the SD card is clear.
Alternatively, you can format the SD card using a computer.
This answer is automatically generated