Table of Contents
Advertisement
Installing your Dash Cam - Rear
1
2
3
1 Remove the 3M protective sheet
Peel off the red layer to expose the 3M sticky pad beneath.
2 Position the Rear Facing Camera on the Rear Window
It is advisable to place the Rear Facing Camera within the wiper zone towards the top of
your rear window in order to record the clearest possible image. Ensure that the view is
not obstructed by heating grid lines.
Opening the Boot
Leave around 30 - 40cm of slack at the rear of the vehicle to ensure that there is enough
cable to comfortably open the boot without dislodging the Rear Facing Camera.
3 Locate and then check the Rear Facing Camera position using the App
Offer the Rear Camera towards the rear window whilst looking at the Live View on the
connected smartphone / tablet. Ensure that the Live View shows the desired image by
moving the Rear Cam to the best position possible on the rear window and adjusting the
lens accordingly.
Avoid any obstructions on the rear window being seen in the Live View and ensure the Rear
Cam is mounted vertically, with the smartphone image the right way up ! Ensure that the Rear
Facing Camera will not obscure the driver's view out of the rear window, and that loose wires
are safely stowed within the lining of the vehicle so as to not cause a distraction.
27
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the 380 GWX and is the answer not in the manual?
Questions and answers
Dash cam beeping every few seconds
The NextBase 380 GWX dash cam is beeping every few seconds due to an issue that has been recognized as a common problem. NextBase has admitted they do not know the exact cause, but the solution provided is to replace both the rear camera and its connecting cable. The issue has been experienced by other users, and replacing these components has resolved the problem.
This answer is automatically generated