Advertisement
Randomizer Mode
By pressing a PIN code in order after two arbitrary numbers are inputted,
a user can prevent PIN code leak.
By default, the multi-leveled security code entry mode is set.
DING DONG
[ 7] Button : Multi-leveled Security
[9] Button : Common Mode
Open the battery cover of
Press the [] button after pressing the
the inner body and press the
[7] or [9] button, and the security mode
[Register] button shortly.
will be set.
2-Step Authentication Mode
Double authorization mode requires both PIN code and key tag to open the door,
enhancing more security.
To set the double authorization mode, one or more key tag need to be registered.
When purchased, the door lock is not set to double authorization mode initially.
DING DONG
Open the battery cover of
Press the [] button after pressing the
the inner body and press the
[4] or [6] button, and the authorization
[Register] button shortly.
mode will be set.
Double Authentication Mode Operation
Success:
BE BE BE BEEP↑
Fail:
DING DONG
DING DONG
Touching
Enter the PIN code
[Number Pad].
when the number pad is
lighted, and press the [ ]
button.
Volume Setting
The sound that is generated when the number buttons are pressed, when
the door is locked, or when the locked door is unlocked, can be set accord
ing to the user's preference.
When purchased, all sounds are set to be generated initially. (1 level)
[31]Button : Mute
DING DONG
[32]Button : Low
[33]Button : High
Open the battery cover of
Press the [ ] button after pressing the
the inner body and press the
[31] ~ [33] button, and the Volume
[Register] button shortly.
will be set.
- [31] : The sounds of door opening/closing and key touching are not deactivated
(except an alarm sound).
- [32]~[33] : All sounds are activated, and the sounds get bigger as the step becomes
higher.
Replacing the Batteries
Melody for low battery notification is triggered
If the melody of "Blues for Elise" sounds when opening the door with the
PIN code or a key tag, it is time to replace the batteries.
(If the battery replacement alarm melody sounds, the battery replacement
[
] LED is lighted on the number pad.)
Battery Replacement
When the battery replacement alarm voice is heard, immediately replace all
batteries with new ones.
- The unit will stop operating suddenly if the batteries are not replaced.
Depending on battery manufacturer, date of manufacture, and the user environment,
●
the duration of use may vary. (In the case of average use, given as 10 times a day, 4
AA alkaline 1.5V batteries can last for 12 months).
Warning
Liquid leaks from batteries can damage the product. Check the batteries regularly
●
(about every 6 months).
Before the batteries are replaced after the battery replacement melody sounds, a
●
menu function such as activating the registration/setting mode cannot be used.
Automatic/Manual Locking Setting
The Automatic Locking mode allows for automatic locking of the door when
it is closed.
DING DONG
DENG
DING DONG
Code Entry Mode
Open the battery cover of
the inner body and press the
[Register] button shortly.
Automatic
The door is automatically locked 2 seconds after the door is closed.
If the battery an alarm sound are heard, replace the batteries.
If the voltage of the door lock continues to be low, the door may not be locked.
Manual
The door does not automatically lock, and the [DOUBLE LOCK] button
must be pressed from the inside or touch [number pad] to close the door.
Regardless of the automatic/manual locking setting, the door will automatically lock
●
7 seconds after the door lock is unlocked if the door is not opened.
Under automatic lock settings, if the door is not locked properly, an alarm will go off
●
Note
and the warning LED on the indoor unit will flicker.
Privacy Mode Activation/Deactivation
At-home privacy mode is to prevent opening of the door from outside while
someone is inside.
DING DONG
Privacy Mode Activation
DENG
[4]Button : Double authorization
mode on
[6]Button : Double authorization
mode off
While the door is locked, press
[CLOSE] button on the inner body
part for 3 seconds.
Privacy Mode Operation
Success:
DING DONG
DENG DONG
Fail: DING DONG
DING DONG
Rapid beeping
Touch the Key tag on to
●
the [Key tag Reader], if the
When the Privacy Mode is activated, the door cannot be unlocked from the
outside, so please be careful. Be especially careful not
authentication is successful,
Warning
to allow children to set this mode accidently from the inside.
the door will open.
7
Using the Emergency Battery
If batteries are not replaced on time, they will be completely discharged and
the lock will not operate.
How to open the door Using Emergency Power
Purchase an emergency battery (9V) at the nearest store.
-
As the alkaline batteries offer longer life, they are recommended over the
manganese batteries or rechargeable ones.
Place the key tag on the Key tag reader, or enter the PIN code , while
the 9V battery is connected to the external power port of the outer body.
Alarm Sound Deactivation
Open the battery cover on the inner body and press the [Register] button, or
open the battery cover and separate the batteries. Authenticate a registered
key tag or pressing the user PIN code and press the [] button.
Intrusion Detection Function
This function triggers an alarm sound when an attempt is made to
forcefully open the door from the inside or the outside.
(It is a basic function, and cannot be activate/deactivated by the user.)
If the door is forcefully opened while locked, the open/close door sensor
detects it and triggers an alarm sound for 5 minutes.
Prank Prevention Function
This function triggers an alarm sound and deactivates lock operation when
the door lock is improperly handled from the outside.
If a key tag that are not registered or a wrong PIN code are used five times,
an alarm sound is generated and the door lock is deactivated for 3 minutes.
10
DING DONG
DENG
[21] Button : Automatic Locking Setting
[22] Button : Manual Locking Setting
Press the [ ] button after pressing the
[21] or [22] button, and the Automatic/Manual
Locking mode will be set.
Privacy Mode Deactivation
DING DONG
DENG
Press down the inner body handle to
deactivate privacy mode.
Inside : Press the [CLOSE] button, then the
sound for action-unavailable willbe
heard.
or
Outside : Press the [Number Pad] or touch with
a Key tag, then the sound for action-
unavailable will be heard.
or
Auto/Manual Key Tag Reading Function Setting
This settings is to automatically or manually detect the Key tags.
Default settings is automatic detection.
DING DONG
Open the battery cover of
Press the [ ] button after pressing the
the inner body and press the
[ 1] or [3] button, and the key tag
[Register] button shortly.
Auto/Manual Detection mode will be set.
●
The door will unlock when the key tag is tagged against the key tag sensor
during auto detection mode.
●
Under manual detection mode, you need to touch the number pad and then
Note
key tag against the key tag sensor.
Away Mode Activation/Deactivation
To prevent intrusion when a user goes out, this function triggers an alarm
sound when someone tries to open the door from the inside.
In Away mode, if someone tries to open the door from the inside, "beep-
beep-" sound is triggered for 5 minutes.
Away Mode Activation
DING DONG
DENG
Once the door is locked, the [
]
button of the number pad is lighted.
Press the [
] button within 3 seconds
to activate the Away mode.
● Away mode function should only be set up when there is no one inside.
Warning
8
High Temperature Alarm Function
If the room temperature abnormally increases, the temperature sensor
detects it and an alarm is triggered. (It is a basic function, and cannot be
activate/deactivated by the user.)
This high temperature alarm function is activated at about 65 °C ± 5°C.
Depending on the installation environment, the temperature may be different.
When a high temperature occurs, the temperature sensor detects it.
The LED of the Warning led on the inner body flashes while an
alarm sound is generated for 15 seconds. After the alarm sound stops,
the door is automatically opened.
(If the room temperature decreases to below a certain temperature,
the door lock is normally operated.)
Product Specifications
Item
Specifications
Voltage
Four AA Alkaline 1.5 V batteries (LR6) (DC 6 V)
Emergency
9V Battery (6LF22) (Separately sold)
Power Source
Operation
Electronic Control Method
(PIN code entry or key tag reading)
Method
Weight
1.824kg (including both inner and outer bodies)
Product
Outer Body
77mm (W) X 228.9mm (H) X 63.2mm (D)
Dimensions
(including the
77mm (W) X 229mm (H) X 73.6mm (D)
Inner Body
handle)
11
DING DONG
DENG
[1] Button : Automatic Detection Setting
[3] Button : Manual Detection Setting
Away Mode Deactivation
or
Enter the user PIN code,
touch a registered key tag
and open the door to
deactivate the Away mode.
9
12
Advertisement
