Fujitsu Airstage UTY-DCGYZ1 Operating Manual page 22

No. Item
Timer name

[Delete] icon

[Copy] icon
3
[New] icon
4
[Select (Delete)] icon
5
[Select (Copy)] icon
6
[New] icon
7
"Time"
8
"On"/"Off"
9
"Mode"

"Set Temp."

"Custom Auto (Cool)"*

"Custom Auto (Heat)"*

"Fan"

"RC Prohibition"

Timer switch-over button

Timer list scroll button (page feed)

Timer list scroll button

Time▲

* Displays only when a unit with "Custom Auto" function is registered.
En-22
Displays the timer name. The timer names are Timer 1 to 40. The smallest
unregistered number at new creation is used for the timer name.
Deletes the currently displayed timer.
Copies the setting timer and creates the timer at the smallest unregistered
number of 1 to 40 and shifts to the new creation screen.
Creates the new timer at the smallest unregistered number of 1 to 40 and
shifts to the new creation screen.
Enters the delete selection mode.
Enters the copy selection mode.
Adds the list at the end of timer list. The list number is the smallest number
of 1 to 10 which is not listed.
Sets the timer time. → Refer to 2-3-2-1.
Selects "On" or "Off". Cancels the change by selecting "Reset".
Selects the mode. ("Auto", "Cool", "Dry", "Fan" and "Heat". Selectable
mode depends on the indoor unit)
Deletes the change by selecting "Reset".
Selects the set temperature with 0.5ºC (1ºF) increments.
Setting range: 10 to 32ºC (44 to 91ºF)
Selects fan speed. "Auto", "High", "Med-High", "Med", "Med-Low", "Low",
"Quiet"
Sets "R.C. Prohibition". → Refer to 2-2-2-3.
Switches over the displayed timer.
Displays the scroll button to switch the timer list page.
Displays the scroll button to switch the timer list by one item.
Rearranges the list in time order when 8 "Time" is tapped.
(When [Select (Copy)] is selected)
(1) Select the timer you want to copy.
Timer is added.
Description