Benthin ROMAN Quick Start Manual

Operation
Closing or opening
covering
Installations with a chain
mechanism are closed/ope-
ned by pulling on the front
or rear chain.
In the case of motor
operation, follow the
additional instructions.
Care
Thanks to a special manufacturing process, our fabrics have an
antistatic finish, making them resistant to dust and dirt.
Occasional cleaning with a soft brush or feather duster will
generally suffice.
Preparing fabric for washing
A Only for fabrics labelled as washable!
Follow washing instructions for fabric!
Follow the instructions for removing/attaching the panel of fabric
on the next few pages.
Put the pull-cords round as shown and hook in with the groove in
the cord clip at the top. This will prevent the cords from getting
caught during washing. Alternatively, bundle the clips up and put
them in a washing bag.
Safety
min. 0,60 m
© 2017 Benthin ® . Misprints, errors and changes excepted . Version 10-10-2017 . 97000205
Installation - Operation - Care
Roman blind type RR31
this dimensionally accurate blind was produced especially according to your
requirements. High quality materials and a design that is perfect in function
and elegance guarantee a long service lifetime and thus ensure great
pleasure in the purchased product.
Please read this instructions carefully
Blinds must be fitted by skilled personnel.
Wrong installation may result in accidents.
Alterations of the blind must be approved by the blind manufacturer.
No screws for fixing are enclosed. Always use appropriate screws and plugs
6
kg
suited for the wall or ceiling material where the blind is fitted!
WARNING
• Young children can strangle in the loop of pull cords,
tapes and cords that operate window coverings.
They can also wrap cords around their necks.
• To avoid strangulation and entanglement,
keep cords out of reach of young children.
• Move beds, cots and furniture away from
window covering cords.
• Do not tie cords together.
Make sure cords do not twist and create a loop.
• Install and use the included safety devices according to the installation
instructions on these device to reduce possibility of such an accident.
Dear Customer,
Your blind Manufacturer
before fitting the blind.
According to EN 13120