Power Control Board Dc - Beko BEKOMAT 13 Original Installation And Operation Manual

Original installation and operation manual

7.2.1.2 Power control board DC

Illustration
3
61
5
6
7
8
2
9
36
6 mm (0.23")
60 mm (2.36")
+24 VDC (0V)
0V (+24 VDC)
5
6
7 I
BEKOMAT 13, 13 CO, 13 CO PN25, 13 CO PN40
®
Description / explanation
1. Loosen the 4 pan-head screws [3] in the top
cover and unscrew the components of the cable
gland [5, 6, 7, 8].
2. Raise the top cover [2] a little and pull the screw
terminal [61] of the power control board up and off.
3. Unscrew the pan-head screw [36] and take the power
control board [9] out of the top cover [2].
4. Prepare the 2-wire cable of the voltage supply.
5. Slide the components of the cable gland [5, 6, 7] over
the cable for voltage supply [I] and insert the cable
into the top cover.
29 | 64