Advertisement
Quick Links
Warnings
The Lowel Fluo-Tec fluorescent studio
line is a professional lighting system.
Read these instructions and lamp
manufacturers warnings before
operating. See Back Cover for
important fuse information.
Do not leave fixture unattended.
For stationary (studio) use.
Not for household use.
Use only for photographic lighting
(video & film imaging).
Do not exceed maximum rated
wattage for unit.
Use maximum 55 Watt lamps.
Always unplug unit before
relamping.
Always unplug unit before
changing fuse.
Be sure lamp is securely seated
in lamp socket.
Do not use near standing water.
Internal ballasts produce high
start-up voltage.
Never bypass plug's ground pin.
Do not interfere with unit's
ventilation.
Do not operate unit with
Barndoors closed.
Make sure clamp is tightened
at yoke.
Always use Safety Cables,
when attaching to overhead pipes or grids.
Do not attempt to open unit,
no user serviceable parts inside.
Always use with supplied Lowel
AC Cable.
Fluorescent Warnings
Avoid looking directly at the tubes
for extended periods of time.
Fluorescent tubes contain highly
poisonous mercury.
In the event of lamp breakage,
avoid contact with broken pieces,
and dispose of properly.
Read lamp manufacturers
information fully.
Contents
Using Lowel Fluo-Tec
Front Accessories
Lowel Fluo-Tec Models
& Control Panel
Lamps & Fuse Change
Fuses & Power Consumption
Mounting the Fixture
Problems, repairs & info
Each fixture comes with:
Gel frame
3 safety cables
Standard C Clamp yoke
mounting device
Standard AC power cable
with male Edison connector
Accessories
Door
Yoke
Clamp
Lamp
Holders
Chassis
Door-
flap
Locks
Lamp
Sockets
Reflecting
Mirrors
Brake Disk
Control
Handles
Dimmable Models
• Studio 250DM
• Studio 250cyDM
• Studio 450DM
• Studio 650DM
• Studio 850DM
Phase Dimmable Models
• Studio 250PHD
• Studio 250cyPHD
• Studio 450PHD
• Studio 650PHD
• Studio 850PHD
Non-dimmable Models
• Studio 250ND
• Studio 250cyND
• Studio 450ND
• Studio 650ND
• Studio 850ND
Studio Fluorescent Instructions
2
Studio 250 M
3
Studio 250PH
Studio 250N
4
4
4
4
Studio 450 M
Studio 450PH
Studio 450N
Studio 650 M
Studio 650PH
Studio 650N
Studio 850 M
Studio 850PH
Studio 850N
Studio 250cy M
Studio 250cyPH
Studio 250cyN
Lowel Fluo-Tec Models
Advertisement
Summary of Contents for Lowel Fluo-Tec Studio 250DM
- Page 1 Studio Fluorescent Instructions Warnings Contents Lowel Fluo-Tec Models The Lowel Fluo-Tec fluorescent studio Using Lowel Fluo-Tec line is a professional lighting system. Front Accessories Read these instructions and lamp Lowel Fluo-Tec Models Studio 250 M manufacturers warnings before & Control Panel Studio 250PH operating.
- Page 2 Using Lowel Fluo-Tec Front Accessories Front Accessories Slide-in Slots Intensifier: Honeycomb Grid: There are 2 slots in front of the fixture Slots are accessible by releasing the twist locks and opening the for slide-in attachment of Front The mirrored Intensifier, when attached,...
- Page 3 To control a single unit using DMX-512, The fixtures of the Lowel Fluo-Tec studio 2.3 or later can be set to dim fully from receiving a valid DMX signal from the...
- Page 4 1.00 A 0.60 A 0.80 A 250ND230 1.00 A 0.50 A 0.80 A models, the Lowel Grand Stand or larger is the safety cut of the stand fitting stud. preferred, however the following stands may 250cyDM230 1.60 A 1.10 A 1.60 A...
Need help?
Do you have a question about the Fluo-Tec Studio 250DM and is the answer not in the manual?
Questions and answers