Table of Contents
Advertisement
Cisco Webex DX70 and DX80
Introduction
Add corporate branding to the screen
Branding in the halfwake state
In halfwake state you can:
•
Add a custom brand background
•
Add a logo in the bottom right corner
•
Customize or remove the message at the center
of the screen. This is the message that informs
the user how to start using the device
In general, we recommend that you keep the
standard message. Change the message only if
you have to adapt it to a different scenario, for
example if you have a third-party user interface.
D15362.17 DX70 and DX80 Administrator Guide CE9.14, OCTOBER 2020.
Configuration
Configuration
Peripherals
(page 2 of 2)
Logo
We recommend:
•
A white logo (so that it goes well with the dark
background brand image)
•
PNG-format with transparent background
•
Minimum 272×272 pixels
Maintenance
www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
48
Administrator Guide
Device settings
Appendices
Custom brand background
•
When the device wakes up, the image is
shown in full color; after a few seconds the
image is automatically dimmed (transparent
black overlay)
•
Image format: PNG or JPEG
•
Recommended size: 1920 × 1080 pixels
Advertisement
Chapters
Table of Contents
