NEC Express5800 Notice page 12

0xa 0x491 Critical
0xa 0x500 Critical
0xa 0x501 Critical
0xa 0x502 Critical
0xa 0x1636 Caution
0xa 0x2404 Caution
0xa 0x2405 Caution
0xa 0x2406 Caution
0xa 0x2408 Caution
0xa 0x2410 Caution
0xa 0x2416 Caution
0xb 0x1b Critical
0xb 0x1c Critical
0xb 0x29 Caution
0xb 0x2a Caution
0xb 0x2b Critical
0xb 0x3c Critical
0xb 0x3d Critical
0xb 0x44 Caution
0xb 0x55 Critical
0xd 0x1 Caution
0xd 0x3 Caution
0x13 0x12 Critical
0x13 0x13 Critical
0x14 0x5 Critical
© NEC Corporation 2016
12
System Health Error. A critical system health error has kept the
system from booting. -System Halted!
ASR NMI Detected - The Automatic Server Recovery (ASR) NMI
has been signaled (per the system configuration policy).
IPMI Watchdog NMI Detected - The IPMI Watchdog NMI has been
signaled (per the system configuration policy).
Application Watchdog NMI Detected - The Application Watchdog
NMI has been signaled (per the system configuration policy).
%1 Trusted Platform Module Error.
Slot %1 SAN Error - Adapter restart failed. Firmware not ready.
Boot from SAN not possible.
Slot %1 Error - Vital Product Data (VPD) is not available.
Slot %1 NIC Error - NIC personality (Ethernet, iSCSI, or FCoE)
could not be changed. FW may require update.
Slot %1 Error - Firmware image recovery not successful.
Slot %1 Error - Controller I/O timeout failure.
%1: Error - Controller firmware not ready.
System Board Power Protection Fault
Power Supply or Power Backplane Detection Error
External Chassis Power Supply: %1 (Chassis %2, Power
Supply %3)
%1 Storage System Power Supply: %2 (%3Slot %4, Power
Supply %5)
%1 Power Supply: %2 (Power Supply %3, %4)
System Power Fault Detected (XR: %1 %2 MID: %3)
System Power Fault Detected (XR: %1 %2 MID: %3)
%1 Storage Enclosure Power Supply Failure (Power Supply %2,
Box %3, %4)
Battery Backup Unit: %1 (Power Supply %2)
ASR Detected by System ROM
ASR Reset Limit Detected by System ROM
%1 Smart Array - Controller Failure (Status: %2)
Drive Array Controller Failure (Chassis %1, Slot %2)
Unrecoverable I/O Error has occurred. System Firmware will log