Seiting The Real-Time Clock - ADEMCO VISTA 4140XMPT2 Installation Instructions Manual

PROCEDURE
m
1
NOTE: A 5137AD or 6139 alpha console must be used to set the real-time clock,
or the clock can be set via the Downbader software. Only users with installer or
master authority level can set the real-time clock,
w
To enter real-time clock mode, enter installer or master code + #63. A
typical display will show:
I TIM13DATE - THU ~
~12:01 AM
01/01/90 I
The day of the week is automatically calculated based on the date entered. Time
and date entries are made by simply entering the appropriate hour, minute,
month, day and year. Pressing the ~] key accepts the entered value and moves
the cursor to the right. Pressing the [#] key moves the cursor to the left of the
display, to the prevbus position.
To set the time and date, simply enter the correct hour then press ~] to
move to the minutes and make the correct entry.
Press ~1 again, then toggle the AM/PM by pressing any key O-9.
Press ~] to move cursor to the month position and enter the correct month using
a 2digit entry.
Press ~] and enter the correct date.
Press [*] and enter the correct year.
To exit clock mode, press the ~] key after the cursor is in the year position.
-36-