Programme Chart - Miele PG 8063 Operating Instructions Manual

Programme chart

Programme
Sf Special
Sf Special Plus
Vario Chem

Reactivation
Rinsing
Drain
 Risk of damage to the load items.
Programme parameters, such as the dispensing concentration of the process chemicals,
can have a damaging effect on the individual load item materials under some circum-
stances.
Observe the parameters specified by the relevant manufacturer for reprocessing the load
items and adjust the programme if necessary. Consult the load item manufacturer or the
Miele Customer Service Department if necessary.
"Further settings/Additional functions" describes how to adjust the programme paramet-
ers.
122
Use
For cleaning and chemically disinfecting lightly soiled
breathing protection materials, e.g. from training exer-
cises (not hot fire training).
For cleaning and chemically disinfecting heavily soiled
breathing protection materials, e.g. from actual assign-
ments or hot fire training.
For cleaning and chemically disinfecting load items with
normal soiling.
The programme must be adapted to the process chem-
icals used (cleaning agent) where applicable.
Manual reactivation.
This can be run to avoid being forced to run a reactiva-
tion programme during busy periods.
Programme for rinsing the wash cabinet, for flushing out
brine (see "Water softener/Adding salt") or for rinsing
heavily soiled load items, e.g. for pre-rinsing soiling, re-
sidual disinfecting agent or to prevent items drying out
and to prevent incrustation before running a full load.
For draining wash water, e.g. after a programme cancel-
lation (see "Operation/Cancelling a programme").
Pre-wash
1 2
CW
1 Min
Reactivation
3