Oil Capacity; Checking And Adding Oil - Briggs & Stratton 190000 Series Operating And Maintenance Instructions Manual

Briggs & stratton engine user manual
Hide thumbs Also See for 190000 Series:
Table of Contents

Advertisement

274787
CAUTION: This engine is shipped from Briggs &
Stratton without oil. Check oil level before starting
engine. If you start the engine without oil, the engine
will be damaged beyond repair and will not be
covered under warranty.

OIL CAPACITY

Engine Model Series 190000 holds about 1-1/8 qts (36 ozs
or 1.1 ltrs). Engine Model Series 280000 holds about 1-1/2
qts (48 ozs or 1.4 ltrs).
TYPE OF OIL TO USE
• Use a high quality detergent oil classified "For Service
SF, SG, SH, SJ" or higher, such as Briggs & Stratton
30W, Part Number 100005 (20 oz) or 100028 (48 oz).
• Do not use special additives.
• Choose a viscosity according to the table opposite.
Note: Synthetic oil meeting ILSAC GF-2, API
certification mark and API service symbol
(shown at left) with "SJ/CF ENERGY CON-
SERVING" or higher, is an acceptable oil at all
temperatures. Use of synthetic oil does not
alter required oil change intervals.

CHECKING AND ADDING OIL

• Check oil level before starting the engine.
• Check level daily, or after every eight (8) hours.
Oil Fill
[1] Place engine level and
clean around oil fill area.
[4] Oil level should be at
FULL mark on dipstick.
°
F -20
°
C -30
STARTING TEMPERATURE RANGE ANTICIPATED BEFORE NEXT OIL CHANGE
*
CAUTION: Air cooled engines run hotter than
automotive engines. The use of non-synthetic
multi-viscosity
temperatures above 40° F (4° C) will result in higher
than normal oil consumption. When using a
multi-viscosity oil, check oil level more frequently.
** CAUTION: SAE 30 oil, if used below 40° F (4° C), will
result in hard starting and possible engine bore
damage due to inadequate lubrication.
• Keep oil level at FULL.
• Do not overfill.
[2] Remove
dipstick and
wipe clean with cloth.
[5] If needed, add oil slowly -
recheck. Do not over fill.
7
SAE Viscosity Grades
**
*
0
20
32
40
60
-20
-10
0
10
oils
(5W-30,
10W-30,
[3] Replace and tighten dip-
stick. Remove and check
oil level.
[6] Replace and tighten dip-
stick.
OIL
80
100
20
30
40
etc.)
in

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 190000 Series and is the answer not in the manual?

Questions and answers

This manual is also suitable for:

280000 series310000210000

Table of Contents

Save PDF