Setting Up Ftp Transfer; Image Ftp Transfer - Cognex DataMan 475 Reference Manual

After providing a File Name, you must include either ".csv" or ".html" depending on which template is selected.
8. Select OK to save and exit.
Note: If you do not include .csv or .html after the file name, it will not save the report correctly.
You can customize the scripts to show more or less detail. For the full list of scripting options, see the DataMan
Communications and Programming Guide.

Setting Up FTP Transfer

To configure the Dataman 475V to export verification results by FTP, change settings in Setup Tool to communicate with
an external FTP server. Setup Tool can export information about:
The image used for verification
l
The result information provided from the Result History pane in Setup Tool
l
The verification results provided in the Code Quality report.
l
To begin setting up an FTP server, configure an FTP server to communicate with Setup Tool. To set up the necessary
information in the Setup Tool window, choose from three panes available for FTP transfer depending on what you would
like to transfer:
Image FTP Transfer
l
Result FTP Transfer
l
Report (scripting) FTP Transfer
l
The TruCheck window provides shortcuts to the three Setup Tool panes under Settings, in the Results through
FTP section of the Navigation menu. For more information, see
You can also click Settings in Setup Tool in the ribbon menu and open Buffering and Transfer to access the FTP
settings.

Image FTP Transfer

To set up image transfer via FTP, fill in the Server Address, the Username, and the Password (if applicable) fields
based on the setup of your FTP server settings.
Navigation on page 35.
40
Settings