Standalone Mode; Switching Between Integrated Mode And Standalone Mode - Westpac EFTPOS Connect User Manual

6.0 Standalone Mode.

Standalone Mode allows the terminal to transact on its own in the event of a POS outage.
It continues to operate independently, without the need for the POS.
Communication options available in Standalone Mode are 4G/GPRS.
Refer to the table below to see what transaction capabilities are available in Standalone Mode.
Category
Transaction Types
Settlement & Reporting

Switching between Integrated Mode and Standalone Mode

To switch the Standalone Mode on/off (i.e. between Standalone and Integrated modes)
use the following function command (triggered on the idle screen using the 'Func' key):
• Press the 'Func' key and enter '11112222' on the terminal.
• Press the 'ENTER' key.
Important Note:
Before completing the transaction, check that the transaction was approved before handing
the customer their copy of the transaction receipt. If the transaction is declined, the terminal
will display an error message giving the reason. Please check the bottom of the receipt
for an 'Approved' or a 'Declined' message.
48
Capability
• Sale
• Cash Out
• Refund (password protected)
• Pre-authorisation
• Completion
• MOTO
• Sale + Cash Out
• Sale with Tip
• Settlement
• Last settlement
• Duplicate Receipt
• Batch totals (Pre-settlement)
• Shift Report (Shift Totals)