Technical Data; Troubleshooting; Care; Disposal - Prexiso PLT40LI Quick Start Manual

EN

Technical Data

General
Range with favourable
conditions *
Accuracy with
favourable conditions *
Smallest unit displayed
Laser class
Laser type
Power OFF automatically
Continuous measuring
Dimension (H x D x W)
Battery durability
Weight
(with batteries)
Temperature range:
- Storage
- Operation
* The typical measurement uncertainty of ±3 mm is valid for
measurements on white, diffusive, reflective targets up to
10m at low ambient light and moderate temperatures. For
distances greater than 10 m, the measurement uncertainty
could increase additionally by 0.1 mm/m. In unfavourable
conditions (such as bright sunlight, targets with poor
reflectivity, or high or low temperatures) the measurement
uncertainty could further increase up to ± 6mm for
distances below 10 m.
6

Troubleshooting

Potential issue table
1.15-135ft
ISSUE
0.35-40m
±1/8in
Failure to
±3mm
switch on
1/16in
1 mm
2
620-690 nm, < 1 mW
after 120 s
IC000
IC255
yes
3.35 x 3.35 x 1.7 in
85 x 85 x 43 mm
up to 5000
IC301
measurements
13.4 oz
IC401
380 g

Care

14 to 140 °F
-10 to 60 °C
• Clean the device with a damp,
32 to 104 °F
soft cloth.
0 to 40 °C
• Never immerse the device in water.
• Never use aggressive cleaning
agents or solvents.
CAUSE ACTION
Hardware protection
Restart the
after shocking
device
Recharge the
Low battery
device
Insufficient Press the
On/Measure/Units On/Measure/Units
button press button firmly
Move the measuring
Beam is moved too fast
tool slowly
The object is out Measure within
of rated range rated range
Received signal Change target surface
too weak/ (e.g. white paper)
Measuring time too long
Received signal Change target surface
too strong
(e.g. white paper)
(target is too reflective)
Ambient light Shadow target area
is too strong
Restart in a proper
Running program is
way by the
not in a proper way
instructions of manual
Restart the device.
If not work, contact a
Hardware problem
local dealer
Prexiso PLT40LI

Disposal

CAUTION
Flat batteries must not be disposed of
with household waste. Care for the
environ-ment and take them to the
collection points provided in accordance
with national or local regulations.The
product must not be disposed with
household waste.Dispose of the
product appropri-ately in
accordance with the national
regulations in force in your country.
Adhere to the national and country
specific regulations.Product specific
treatment and waste management can be
downloaded from our homepage.

Warranty

The Prexiso PLT40LI has a two-year
warranty.
For further information on this, contact
your dealer.
This warranty is void if product is used for
commercial purposes. This warranty is
not transferable and does not cover
products damaged by misuse, neglect,
accident, alterations or use and
maintenance other than that specified in
the owner's manual. This warranty does
not apply to any expendable parts that
can wear from normal use. This
warranty excludes any accessories.