Stereo Mix Export Function - Tascam 12 Owner's Manual

7 - Track editing

Stereo mix export function

MAIN MIX L/R bus recording files (mono) can be converted to a
single stereo file.
Converted stereo files are saved in the "MUSIC" folder.
Saved files are named according to the song name. For example,
the file name will be "181228_0002_2-MIX_01.wav" if the song
name is "181228_0002".
If the size of the converted file would exceed 2 GB, multiple files
will be created with numbers like "02" and "03" at their ends.
1.
Load the song to be exported as a stereo mix in advance.
For details about loading songs, see "Loading Songs" on
page 36.
2.
When the recorder is stopped, select STEREO MIX EXPORT
on the MENU Screen, and open the STEREO MIX EXPORT
Screen. (see "Menu operation procedures" on page 29)
Press the F4
3.
button to start conversion.
NOTE
i If a converted file already exists, a message to confirm
overriding appears.
Press the F3
button to delete the existing file and start
conversion. This operation cannot be undone.
i Conversion is not possible if no MAIN MIX L/R bus file has
been recorded. The message shown below will appear.
i During conversion, press the F1
conversion. A file with the part converted before canceling
will remain.
4.
When conversion completes, the MENU Screen will reopen.
NOTE
Converted files can be played using this unit's SD PLAY
mode. For details about playback with the SD PLAY mode,
see "Playing WAV files on SD cards (SD PLAY mode)" on page
62.
48
TASCAM Model 12
button to cancel