Ateis PENTON RCS Series Installation Manual

ROUND METAL CEILING LOUDSPEAKER MINIATURE
RCS 3/T
The RCS range of ceiling loudspeakers have been carefully
designed to blend seamlessly in to any installation. These units are
stylish yet unobtrusive.
Made from a pressed steel epoxy coated chassis incorporating
a twin cone driver, which offers a wider frequency response
than a standard single cone, this gives the RCS range a superior
performance. Designed to make installation quick and easy
and suitable for use in applications where background music
and speech are the primary requirement such as shops, schools,
restaurants, hotels, public houses, offices etc.
 Electrical
Rated power, Watts
Tappings 100 volt line, Watts
Transformer Impedance, Ohms 100V
Tappings 70.7 volt line, Watts
Driver impedance, Ohms
Effective Frequency Range, Hz (BSEN60268-5)
S.P.L. @ 1m, 1 watt, dB, Test Signal Bandwidth 100Hz-10 kHz
S.P.L. @ Full power Octave Bandwidth, dB
Acoustic Power (dB-PWL@1 watt) 1 k/2kHz, dB
Dispersion at 1k/2kHz, Degrees
Directivity Axial Q factor, 1 k/2kHz
 Environmental
IP Rating
Min/Max amb temp
Relative Humidity
 Mechanical
Dimensions, diameter, mm
Net weight, kg
Colour/Finish
Material
Mounting
Cut-out, mm
ATEÏS Europe B.V.
Celsiusstraat 1, 2652 XN Lansingerland, Netherlands
Phone +31 (0)10 208 86 90, www.ateis-europe.com, info@ateis-europe.com
RCS3T_datasheet_AE_en_vn1.0_web
6
6/4/2
1.67k/2.5k/5k
3/2/1
8
100-20.000
87
94
83/85
180/180
2.0/2.4
21
-25°C to 70°C
≤60%
Ø104.5
0.49
White RAL9016
Steel
Twin Spring
Ø85
Page 1/2