Collets For Bars 602P; Collet For Bars - Table - IEMCA MASTER865 VERSO MP SIII Manual For Use And Maintenance

11 - COLLETS

11.14 COLLETS FOR BARS 602P

11.15 COLLET FOR BARS - Table

WARNING — CAUTION:
the collet external diameter should be at least 0.5 mm smaller than the bar
pusher external diameter.
INFORMATION:
upon specific request, non standard collets with reduced thickness (which are
not mentioned in this table) may be supplied as well. Their durability is however
below the durability of standard collets.
A Collet
B Bar diameter
C Example:
3 mm = 030
3.5 mm = 035
12.5 mm = 125
12.75 mm = 127
D Category
11 - Pag. 19 / 19
MASTER 865 VERSO
Code structure
EN