GEAR HOUSING – SPINDLE SHAFT
Remove the wedge.
In order to remove the lock ring, you
need small lock ring pliers of make:
Milbar/Imperial IR-15R or equivalent.
Start by turning the lock ring to ensure
the opening is accessible by pliers in the
gear wheel.
Milbar/Imperial
IR-15R
Expand the lock ring using the pliers and
lift the ring up slightly. Lift the opposite
side of the ring with a hook. Lift the lock
ring off the shaft.
Lift off the gear wheel.
The gear housing after the removal of the
intermediate shaft and spindle shaft com-
ponents.
6
11