Table of Contents
Advertisement
SinoTrack GPS TRACKER
USER MANUAL
PREFACE
Thank you for purchasing SinoTrack GPS tracker. This manual
shows how to operate the device smoothly in details, please make
sure to read this manual carefully before using the device. Please be
noted that any update of the manual is made without prior notice.
Each time the update of the manual will be released in the latest
product sales. The manufacturer won't assume any legal
responsibility for any errors or omissions made in this manual.
1
Advertisement
Table of Contents
Related Manuals for Sinotrack ST-905
Summary of Contents for Sinotrack ST-905
- Page 1 SinoTrack GPS TRACKER USER MANUAL PREFACE Thank you for purchasing SinoTrack GPS tracker. This manual shows how to operate the device smoothly in details, please make sure to read this manual carefully before using the device. Please be noted that any update of the manual is made without prior notice.
- Page 2 Network GSM/GPRS Band 850/900/1800/1900Mhz GPS sensitivity -159dBm GPS accuracy Charging input DC 5V==1.0A ST-905: 3.7V 5000mAh battery Battery ST-915: 3.7V 10400mAh battery ST-925: 3.7V 20800mAh battery Stand by 60days, 120days, 240days Storage Temp. -40° C to +85° C Operation Temp.
- Page 3 2. Hardware Description (ST-915 as example) 1. USB port 2. Indicator light 3. SIM card slot 4. Silicone plug 5. Induction Sensor 6. Strong Magnet INDICATOR LIGHT STATUS MEANING Yellow light -Solid GPRS connection Yellow light -Flash No GPRS signal Blue light -Solid GPS connection Blue light -Flash...
- Page 4 3. TURN ON THE DEVICE ⚫ Open the rubber cover; insert the SIM card (chip up) to the slot. ⚫ The indicator light is on when SIM card is inserted. ⚫ The device gets GPS location when there is GPS signal and gets LBS location when there is no GPS signal.
- Page 5 When the unit is in over-speed alarm, shake sensor alarm, or low battery alarm, it will send alert to the admin number. (13265790180) Admin number Canceling: Command: D101# Reply: SET OK! 4.3. Over-speed Alarm setting Over-speed Alarm setting: Command: 1220000 070（Suppose speed is 70km/h）...
- Page 6 4.5. Take off Alarm setting (Factory default setting is on.) Command：TAKEOFF0000 Message Reply: SET OK! Not e: There is anti-removal induction sensor on the back of device. If this covered induction sensor is not covered again. It will send “Take off Alarms!”...
- Page 7 4.7 Terminal (local) Time Setting (factory setting GMT 0) Command: 8960000E00 Reply: SET OK! E.g: 8960000E01 8960000W01 8960000E00 4.8 Reset Hardware Command: RESET Reply: SET OK! 4.9 Read the Configure data Command: RCONF Reply: the ID, work mode, IP and Port, APN of tracker.
- Page 8 5. EXPLANATION OF PARAMETERS/CODES IN SMS MESSAGE It’s the setting of tracker ◆ ST-915 the model of tracker. ◆ ID:6180127780 the ID of GPS Tracker ◆ UP:0000 the password of SMS ◆ U1:,U2:,U3: The control number ◆ MODE: GPRS-MOVE: GPS work mode. ◆...
- Page 9 6. START ONLINE TRACKING Every sim card carrier has own APN content, we have two methods to find out apn content : check sim card carrier on internet or put sim card into cell phone to find out APN SMS: 8030000 APN (APN is Access Point Name of your SIM Card, please check with your SIM Card provider if you don’t know it)
- Page 10 User Name: ID number on tracker Password: 123456 If you have more SinoTrack GPS trackers, and want to manage them in one account, please contact us, we will create an account for you, so you can monitor multiple devices on the platform at the same time.
- Page 11 7. Notices: 1.GPS tracking can be worked outdoor. 2.Please make sure GSM SIM card supports making calls, sending messages, GPRS network. 3.Please make sure GSM SIM card is with sufficient balance. 4.Please make sure the GSM card has opened the call shows and turned off the call transfer.
- Page 12 8. FAQ and processing methods. Instructions/Solutions Fail to turn it on Please check if battery is charged ⚫ Please check if SIM card installed correctly. ⚫ Please check if SIM card is GSM network. ⚫ Don’t turn on the PIN code No GSM signal ⚫...
Need help?
Do you have a question about the ST-905 and is the answer not in the manual?
Questions and answers
Tengo un gps sinotrack st-905 y quisiera saber como borrar el historial ubicacion del gps ya que no e podido directo de la aplicacion de sinotrack y no e conseguido ningun codigo para borrar historial