Summary of Contents for Swann Retro SRA43010
- Page 1 DAB Radio Model: SRA43010 (all colours) Help line: 0333 220 6050 v1.0 SRA43010_IM.indd 1 03/08/2020 09:15...
- Page 2 GET TO KNOW YOUR RADIO! SRA43010_IM.indd 2 03/08/2020 09:15...
-
Page 3: Control Method
GET TO KNOW YOUR RADIO! Control Method On/Off/Standby Press the button to turn the radio on. Once on press it again to enter standby mode or hold it to turn the radio off. Using The Buttons All the button actions are just a quick press unless otherwise stated in the required action. -
Page 4: Dab Options
GET TO KNOW YOUR RADIO DAB Options DAB Menu Options Press and hold the ‘Info/Menu’ button until you see ‘Full Scan’. Press the tune +/- buttons to cycle the options and press the dial to select. The options here are: Full Scan >... - Page 5 GET TO KNOW YOUR RADIO! The ‘Low’ option will give you a small amount of DRC, where as ‘High’ with give you strong amount of DRC. Use the tune +/- buttons to go through the options and press the dial to select the required preference. The asterisk in the top right corner indicates the current selection.
- Page 6 GET TO KNOW YOUR RADIO! FM Options FM Menu Options Press and hold the “Info/Menu” button until you see ‘Scan Setting”. Press the tune +/- buttons to cycle the options and press the dial to select. The options here are: Scan Setting >...
-
Page 7: Bluetooth Mode
GET TO KNOW YOUR RADIO! Bluetooth Mode Select Bluetooth Mode To select Bluetooth press “Mode” until “Bluetooth” shows on the display. The radio is automatically in pairing mode and shows “Disconnected” on the display. Activate the Bluetooth on your device and search for available devices. Look for and add (SWAN RADIO] The radio will automatically pair with the device and no code is required. - Page 8 GET TO KNOW YOUR RADIO! Alarm See Page 12. You can change the sound output preference with this feature. Once selected from the system options you with have access to: Normal > Classic > Jazz > Pop > Rock > Speech > My EQ You can customise the EQ by using the sub menu under “My EQ”...
- Page 9 GET TO KNOW YOUR RADIO! Similar to setting the hour and minute, you cycle through the numbers with the tune +/- buttons and press the dial to select your chosen value, and then move to the next value to set. When the last value is set the display will confirm that the new time and date has been saved.
-
Page 10: Dab/Fm Preset
GET TO KNOW YOUR RADIO! Inactive Standby You can set the radio to change to standby mode after a preselected period of time with this feature. Once selected from the system options you will have the following options: OFF >2>4>5>6 (Hours) Cycle through the options with the tune +/- buttons and press the dial to select an op- tion. -
Page 11: Dab/Fm Information
GET TO KNOW YOUR RADIO! Recall A Preset To recall saved presets 1, 2, 3,4 or 5 simply press the required ‘Quick Access’ but- ton on the top of the device. To recall presets 6 to 10, simply press the ‘Preset’ but- ton and then use the ‘Tune+/-’... - Page 12 GET TO KNOW YOUR RADIO! Alarm Setting the Alarm There are 2 alarms you are able to set on this radio when the radio is on and not in standby press ‘Alarm’ once to set alarm 1 or press ‘Alarm’ twice to set alarm 2 and press the dial to select.
-
Page 13: Specifications
SPECIFICATIONS • DAB receiver (174MHz - 240MHz) • FM receiver (87.5M Hz - 108.00MHz) • Stores 10 FM presets • Stores 10 DAB presets • Bluetooth • Powered by 4 x AA alkaline batteries • 5v mains adapter (included) • Auto adjusting clock •... -
Page 14: Warranty
WARRANTY This product is guaranteed for 2 years from the date of original purchase. If any defect arises due to faulty materials of workmanship the faulty products must be returned to the place of purchase. Refunds or replacement is at the discretion of the store. The following conditions apply: •... - Page 15 NOTES SRA43010_IM.indd 15 03/08/2020 09:15...
- Page 16 www.swan-brand.co.uk 2 year Est. 1 931 GUARANTEE Scan this QR code We love we’re proud Find us on Facebook to hear about what we do of our quality our story * on selected products Copyright © Swan Products Ltd. PO Box 3117, Stoke-on-Trent ST4 9GD SRA43010_IM.indd 16 03/08/2020 09:15...
Need help?
Do you have a question about the Retro SRA43010 and is the answer not in the manual?
Questions and answers
The radio switches itself off after a minute?
The Swann Retro SRA43010 radio may switch itself off after a minute if the inactive standby feature is enabled with a very short time setting or if the alarm duration is set to a short time. You can adjust the standby time or alarm duration using the system or alarm settings.
This answer is automatically generated