Advertisement
Quick Links
The
Tazer JL Mini
device for the following vehicles:
2018-2020 Jeep Wrangler JL
2020 Jeep Gladiator JT
Firmware Updates
ZPU (Z Automotive Programming
also on the website, to install the firmware
over USB.
User's Guide
For Firmware
is an electronic plug-in
New firmware
is available
periodically,
always free
and posted
to the Z
Automotive
website. Use
Utility),
11.2.0-031220
Contents
Feature List
•
Vehicle Settings
•
Live Functions
Installation
Vehicle Settings
•
Submenu Performance
•
Submenu Tire
•
Submenu Radio
•
Submenu Lighting
•
Submenu Comfort
Live Menu Settings
Non-Menu Live Functions
Configuration
The Unmarry Key
Troubleshooting
Also compatible with
Jeep Gladiator JT
2
2
3
4
5
6
7
7
7
8
10
11
13
13
14
1
Advertisement
Summary of Contents for Automotive Tazer JL Mini
- Page 1 Also compatible with Jeep Gladiator JT User’s Guide For Firmware 11.2.0-031220 Tazer JL Mini is an electronic plug-in Contents device for the following vehicles: Feature List • Vehicle Settings 2018-2020 Jeep Wrangler JL • Live Functions 2020 Jeep Gladiator JT...
-
Page 2: Feature List
• Vehicle Settings are changes made to the Jeep such as tire size, gear ratios or settings which accomodate other upgrades. These changes will continue to operate after the Tazer JL Mini is unplugged. • Live Functions are operations the Tazer JL Mini performs live, only while it is physically connected. Vehicle Settings •... - Page 3 5” radio • one-touch return-to-stock – quick • enable automatic headlights “Unmarry” function returns to stock. Live Functions • AutoStopStart Disable – Tazer JL Mini • Light Show – 6 preset and 3 make- will automatically remember the last...
-
Page 4: Installation
Trouble Codes to see why the Check Installation Installation is a matter of unplugging the • The Tazer JL Mini is intended to be left SGW module above the OBD2 diagnostic plugged in, as many of its features (Live connector and plugging the Tazer JL Mini Functions) only work when installed. -
Page 5: Vehicle Settings
Vehicle Settings This section explains how to use the Tazer JL Mini to change the vehicle settings for feature activation. Menu Navigation items. To change/select a setting, • For all functions involving the dash press and hold LEFT ARROW and tap (EVIC) display, the EVIC screen first the Cruise “ON/OFF”... - Page 6 “Marry” the Tazer JL Mini full 2.5 minutes for the Tazer JL Mini to to the vehicle. When you select this reboot all systems – the Uconnect will...
- Page 7 Submenu Tire: TPMS and tire size options • Set TPMS: Turn the tire pressure to raise or lower the pressure, then monitoring system on or off. select it to save the new setting. (The • Set Tire Pressures Front/Rear: Change car’s computer will only recognize a the TPMS warning pressures –...
- Page 8 • Set Front Axle Disconnect: This bar, and once it’s disconnected, enter the setting will delete the factory Front Axle Tazer JL Mini JL settings menu and set Disconnect for those that have done axle the Sway Bar off. It’ll remain disconnected swaps.
- Page 9 • Firmware Version Display: Shows the current Tazer JL Mini firmware revision. • Serial Number Display: Shows your Tazer JL Mini’s serial number for (only needed in specific tech support situations) • Unmarry Key: Displays the current one-time use Unmarry Key.
- Page 10 Live Menu Settings This section explains how to use the Tazer JL Mini’s live functions – these are activated with the same button presses as the Settings Menu, but while the engine is RUNNING. These features will only work if the Tazer JL Mini remains plugged in.
- Page 11 Non-Menu Live Settings Some live functions of the Tazer JL Mini are not accessed via a menu, but rather work automatically or with button presses. • Light Shows: The Tazer comes pre- the first light show in the sequence. configured with 6 light shows out of Again to advance to the next show.
- Page 12 lockers as if in 4LO. See LOCKERS in buttons. Continue to hold and pump the Button Remap section for full locker brakes twice, firmly. The Jeep will stay control held using only the front brakes while • Cooldown Mode: With the ignition you press on the accelerator to do a on but engine not running, press the burnout.
- Page 13 Any of the 8 light shows Cruise is on, they will operate as normal backup cameras cruise control buttons. For TC Kill, a Line Lock vehicle restart is required to bring the Rock Crawl system back to normal. For Lockers, the TC Kill normal Locker off button disengages Cooldown...
-
Page 14: Common Troubleshooting Questions
Z Automotive cannot be held responsible misuse or consequential damages. If you are in doubt, email support@zautotech.com. Please be aware that modifying your vehicle in any way can affect your vehicle’s warranty, longevity, handling, etc.
Need help?
Do you have a question about the Tazer JL Mini and is the answer not in the manual?
Questions and answers