Fakir LUMINOSO SMART User Manual page 44

Child Look
Note!
You may not use other buttons when the child lock is active. Cancel the child lock
first to activate functionality of the other modes.
Timer
UV
Cleaning Indicator
44
Usage
Press the sleep mode button and the on/off button for 3
seconds simultaneously to activate the child look. LOCK
sign shall be displayed on the screen.
You may also activate this mode by pressing the child
lock key on the remote control. Repeat the same
procedure to cancel child lock.
The air purifier starts to work, without the timer being
set. You can set the desired time (1-9 h) by pressing the
timer button. The time set in the control panel appears
on the display.
When the timer is set, the device works in countdown
mode and switches off when the timer has reached the
end.
When this
display and the UV lamp is activated.
By pressing this button again, the UV symbol turns off
and the UV lamp becomes inactive.
It is recommended to clean the appliance when CLEAN
CELL is displayed on the screen. After cleaning of the
electrostatic filter, put it back in place.
Switch on the appliance:
Press and hold the sleep mode button and the timer
button simultaneously for 3 seconds and CLEAN CELL
sign turns off.
indicates that the timer is not active.
button is pressed, UV appears on the