Safety - HAUL MASTER 60438 Owner's Manual & Safety Instructions

IMPORTANT SAFETY INFORMATION
Hydraulic Cart Safety Warnings
1. Study, understand, and follow all instructions
before operating this device.
2. Do not exceed listed weight capacity.
Be aware of dynamic loading! Sudden
load movement may briefly create excess
load causing product failure.
3. Lock Casters when unattended.
4. Be aware of pinch points. Keep hands and feet
clear of the lifting mechanism during operation. The
Scissor Arm Assembly (151) can cause serious
injury when opening or closing. Do not allow anyone
near the Scissor Arm Assembly during operation.
5. Use only on a flat, stable, hard surface.
6. Do not make any alterations to this product.
7. Wear ANSI-approved safety goggles and
heavy-duty work gloves during use.
8. Keep clear of load while lifting and lowering.
9. Lower load slowly.
Item 60438
SAVE THESE INSTRUCTIONS.
For technical questions, please call 1-888-866-5797.
10. Inspect before every use; do not use
if parts are loose or damaged.
11. Before first use, check hydraulic fluid level and fill
to the top of the fill port as described on page 5.
Place the Table Assembly on a flat surface which
is well lighted and safe for assembly operation.
Thoroughly test the Lift Table for proper operation.
12. Maintain labels and nameplates on the tool.
These carry important safety information.
If unreadable or missing, contact
Harbor Freight Tools for a replacement.
13. This product is not a toy.
Keep it out of reach of children.
14. Do not use for aircraft purposes.
15. The warnings, precautions, and instructions
discussed in this instruction manual cannot
cover all possible conditions and situations
that may occur. It must be understood by the
operator that common sense and caution are
factors which cannot be built into this product,
but must be supplied by the operator.
Page 3