12. DISASSEMBLY AND AD-
JUSTMENT
12.1 Pickup Roller and Feed Roller
(1) Open the jam access cover.
(2) Remove 2 screws and take off the cover guide.
(3) Remove the clips at the both sides of the pickup
roller unit. Slide the bushings and take off the
pickup roller unit.
(4) Remove 2 clips and slide the feed roller, pickup
roller and pickup arm. Pull out the parallel pin and
remove the pickup arm, pickup roller and feed
roller.
October 2000 © TOSHIBA TEC
Cover guide
Clip
Bushing
Pickup roller
Parallel pin
Pickup arm
12-1
Clip
Clip
Feed roller
MR-3011/3012 DISASSEMBLY
Bushing