Novexx Solutions XLP 504 Service Manual page 159

XLP 504 / XLP 506
Service manual
Service done
Settings
No, Yes

Parameter only appears in service mode.
Increases the counter level of the "Service operations" counter on the "Service Status" printout by
one
See parameter
• Yes: Increases the counter "Service operations" by one
• No: Doesn´t increase the counter
Head exchange
Settings
No, Yes

Parameter only appears in service mode.
Increases the counter „Head number" on the info printout „Service Status" by one
See parameter
• Yes: Increases the counter "Head number" by one
• No: Doesn´t increase the counter
Roller exchange
Setting range
No, Yes

Parameter only appears in service mode.
Increases the counter „Roll number" on the info printout „Service Status" by one
See parameter
• Yes: Increases the counter "Roll number" by one
• No: Doesn´t increase the counter
Cutter change
Setting range
No, Yes

Parameter only appears in service mode and with activated cutter.
Increases the counter „Cutter number" on the info printout „Service Status" by one.
See also parameter
• Yes: Increases the counter "Cutter number" by one
• No: Doesn´t increase the counter
Serv. data reset
Setting range
No, Yes

Parameter only appears in service mode.
05/2018 | 09
Default setting
No
Service Status  on page 169.
Default setting
No
Service Status  on page 169.
Default setting
No
Service Status  on page 169.
Default setting
No
Service Status  on page 169.
Default setting
No
Step width
--
Step width
--
Step width
--
Step width
--
Step width
--
159
Easy Plug
--
Easy Plug
--
Easy Plug
--
Easy Plug
--
Easy Plug
--
Parameter Menu