Lenovo E-color Pen Quick Start Manual page 2

 The default function of each button might vary in different apps.
Charge the pen
To charge the pen, connect the pen to a 5 V charger with a USB-C cable.
Pair the Pen
Press and hold the top pen button for at least 3 seconds, select Connect when a swift pair notification alerts
that a new bluetooth device "Lenovo E-color Pen" was found.
If you do not receive the swift pair notification, you can also do the following to pair the pen.
Step 1. Select ➙ ➙
-
devices Bluetooth.
Step 2. Press and hold the top pen button for at least 3 seconds until the LED indicator blinks white,
indicating Bluetooth pairing is turned on.
Step 3. On your device, select Lenovo E-color Pen and start pairing.
Pen operating mode
The pen supports two operating modes: Windows mode and Color mode. After connecting with Bluetooth,
you can set the operating modes in the Lenovo Pen settings.
 Windows mode:
– Write or draw on the touch screen.
– View or change functions of the top pen button and two barrel buttons in the Lenovo Pen settings.
 Color mode:
– Write or draw on the touch screen.
– View or change functions of the two barrel buttons in the Lenovo Pen settings.
– The top pen button only supports the color capture function.
➙Devices
-
Bluetooth and other devices
-
Add Bluetooth or other
Chapter 1 Get started with your computer
3