6.4. Start up Information.
On powering up, the Speedy X-treme will briefly show on its display the following numbers.
P (Pigeons on clock)
C (Clocked race birds)
The recommended year for a Bricon service will also be displayed.
6.5. The Antenna Alarm.
As part of its start up process the Speedy X-treme clock carries out a search for connected antenna
pads and displays the number of different antenna pad identities that it has found in the search.
The Speedy X-treme will continue to carry out regular antenna searches, and if at any time fewer pad
identities are found than on the initial search (say due to a connection problem), then the antenna alarm
will activate, giving a long continuous sound. Action can then be taken to find and rectify the issue.
Please note that if the power to the clock is lost, then the antenna alarm will not be able to function.
6.6. Continuous Clocking with the Bricon Plus.
The Speedy X-treme is fully compatible for use with the 'Bricon Plus' the optional reserve clock that can
take over and continue to record birds when the Speedy X-treme is removed to go to the club house.
The 'Bricon Plus' reserve clock is available from your Bricon supplier.
7. USB Connector >>> Bricon Print Manager - Bricon Monitor - BriconWeb.
The Speedy X-treme clock has an integrated USB port giving
computer connectivity and FREE access to a range of special
programs and options to enhance your enjoyment.
These added features are briefly described on page 2 of this
guide, but a fully detailed special online USB user guide for
these elements highlighting the very latest attributes can be
.
downloaded from the Bricon website.
7.1. Software Updates.
The Speedy X-treme receives free software updates without the need for a master. Connect the clock
(using the USB cable) to an internet connected computer with the Bricon Club Editor software running
and if required the latest clock software will download. See the online user guide for details.
8. Unives 1.7 Compatibility.
The Speedy X-treme clock is fully compliant with the Unives 1.7 protocol, and can therefore be used
with any brand of master system that also supports the agreed and established Unives 1.7 protocol.
Bricon can supply a Bricon Unives Connection Cable, that has a 9 pin male connector to plug into the
clock and a 4 pin male round connector to connect to the unives socket of the variant brand of master.
9. Maintenance and Service.
The Speedy X-treme should only be used for the electronic timing of racing pigeons.
Ensure that the Speedy X-treme is kept away from liquids, sunlight and extreme temperatures.
Clean the Speedy X-treme by removing dirt with a lightly dampened cloth and do not use solvents.
The recommended service date is displayed on start up which is a minimum 7 years from purchase.
For customer confidence and reassurance, the clock has the self diagnostic Bricon Battery Control
System (BBCS) that will give a warning message on screen should the clock develop a low battery,
All repairs and service to the system should be referred to and ultimately carried out by Bricon.
B (Basketed race birds)
R (Races active on clock).
USB port
SPEEDY X-TREME
18
Need help?
Do you have a question about the SPEEDY X-TREME and is the answer not in the manual?
Questions and answers