Using The Radio As A Transceiver For Packet Communication - Yaesu FTM-400XDR Operating Manual

Using the Radio with an External Device Connected
Using the radio as a transceiver for packet communication
Packet communication via this radio is possible by connecting this radio to the TNC
(terminal node controller).
● Preparations
• TNC
• Personal computer
• Data cable* ... Prepare a data cable to match the connecting device
* We supply the following optional products.
• Data cable "CT-167" (optional)
➀ PKD (packet data input)
➁ GND
➂ PSK (PTT)
➃ RX 9600 (9600 bps packet data output)
➄ RX 1200 (1200 bps packet data output)
➅ PK SQL (squelch control)
➆ TXD (serial data output [transceiver → PC])
➇ RXD (serial data input [transceiver ← PC])
➈ CTS (data communication control)
➉ RTS (data communication control)
• Data cable "CT-164" (optional)
➀ PKD (packet data input)
➁ GND
➂ PSK (PTT)
➃ RX 9600 (9600 bps packet data output)
➄ RX 1200 (1200 bps packet data output)
➅ PK SQL (squelch control)
➆ -
➇ -
➈ -
➉ -
162
To the transceiver
To the transceiver
To the TNC etc.
➀ Brown PKD (packet data input)
➁ Black thick wire GND
➂ Red PSK (PTT)
➃ Orange RX 9600 (9600 bps packet data output)
➄ Yellow RX 1200 (1200 bps packet data output)
➅ Green PK SQL (squelch control)
TXD (serial data output) [transceiver → PC])
➆ Blue
RXD (serial data input [transceiver ← PC])
➇ Grey
➈ White CTS (data communication control)
➉ Black RTS (data communication control)
To the TNC etc.
➀ PKD (packet data input)
➁ GND
➂ PSK (PTT)
➃ RX 9600 (9600 bps packet data output)
➄ RX 1200 (1200 bps packet data output)
➅ PK SQL (squelch control)