Ld) Program Load Frame: Detail-2 - Fujitsu BS2000 SE Series Operating Manual

Server Unit /390

4.4.2.2 (LD) PROGRAM LOAD FRAME: DETAIL-2

-VM MODE-
==> 2
*1 NATIVE
>*2 AVM/EX
CL-0
RA
Figure 9: PROGRAM LOAD FRAME: DETAIL-2 screen
By making an entry in this frame and pressing the ENTER key, you set the operating mode.
Selection of the firmware to be loaded from SVP
VM MODE ==>
1 NATIVE for BS2000 operation
2 AVM/EX for VM2000
IPL EXECUTION ==> IPL execution
1 ENABLE executes IPL
DISABLE does not execute IPL
2
If there are changes to the VM MODE and IPL EXECUTION ==> 2, only the other firmware is loaded and no IPL is
executed.
----- PROGRAM LOAD FRAME: DETAIL-2 -----
CPU-0 CHP-0
-IPL EXECUTION-
==> 1
>*1 ENABLE
*2 DISABLE
*ENTER EXECUTE
*PF3 GO TO BASIC FRAME
*PF9 GO TO DETAIL-1
RUN
E90L01G
[]-[]00
34