Set Up Your Device In The Aiwit App - EKEN V5 User Manual

Set up your device in the Aiwit app.

To pair your device, follow the steps below and in-app
instructions.
1. Open Aiwit App and log in to your account.
2. To add your camera, select the + icon.
3. Select Video Doorbell.
4. Press and hold the Doorbell Button until the red light
is flashing, tap Next, then tap Yes.
5. Enter your 2.4GHz Wi-Fi network and the Wi-Fi
password, then tap Next (5GHz is not supported).
6. Use your device camera to scan the QR Code shown
on the app, then select Confirm once the Wi-Fi setup
has finished.
4 inches (10 cm)