Replacing Ink - MIMAKI UCJV300 Series Operation Manual

Replacing Ink

l Removing Ink Bottles
1
Rotate the lever on the tank section from left to right.
• Never attempt to rotate the ink bottles. Doing so may result in leaking ink.
2
Lift the ink bottles vertically.
• Check to confirm that the light-blocking cover is closed when removing ink bottles. Close
the light-blocking cover by hand if it is open. If the light-blocking cover is left open, the ink
may harden, resulting in printer failure.
• Be careful to prevent ink leaks from the ink bottles.
• The O-ring fitted to the special cap may become detached when removing an ink bottle.
Refit the O-ring if it becomes detached.
Chapter 1 Before Using This Product
Light-blocking
cover
43
1