Additional Information; Help And Information; Firmware-Update; Technical Data - GHL ProfiLux 4 Instruction Manual

9 Additional Information

9.1 Help and Information

For help or further information, please visit our Support Forum or our Knowledge Base at
www.aquariumcomputer.com

9.2 Firmware-Update

The firmware of your ProfiLux 4 controller is constantly being further developed. If you want
to use new features that are not supported by your current firmware, you can update your
controller.
DANGER
For the update, you need the latest firmware and the PC program GHL Control Center, both of
which can be downloaded free of charge from our homepage
in the download area (Support-> Downloads), as well as our USB cable.
Instructions for updating firmware can be found from our homepage.

10 Technical Data

The device and its accessories may only be used indoors. Moisture or excessive
humidity can lead to malfunctions or damage.
Power supply
Input voltage
Environmental conditions
Current consumption
EN
2019-01-22
or contact your retailer.
Be sure to back up your data before updating!
•
You can use the menu item
"Backup and Restore" -> "Transfer all settings from ProfiLux to file" and
load them again after the successful update via "Transfer from file to
ProfiLux".
Wide range power supply 100 – 240 VAC (50 – 60 Hz), < 0,6
A RMS
12 VDC
Operating temperature: 0°C - 40°C / 32°F – 104°F
Humidity: Max 80% rel. Humidity non-condensing
1.2 A max.
Instruction Manual ProfiLux 4 / 4e
www.aquariumcomputer.com
48