Range In Miles Or Km - Maserati Levante Owner's Manual

Dashboard Instruments and Controls
NOTE:
To set these systems, see chapters
"Adaptive Cruise Control - ACC",
"Active Driving Assist - ADA" and
"Lane Keeping Assist - LKA" in section
"Driver Assistance Systems".
Press and release the
return to the main menu.
4. TRIP & FUEL ECONOMY
Press and release the multifunction
switch in the or
4 directions until this menu item is
displayed.
For each of the "Trip A" and "Trip B"
sub-menus the screen will display the
following:
• "Distance" traveled in miles or km.
Shows the total covered distance
since the last reset.
• "Average" consumption in MPG (US),
MPG (UK) or L/100km. Shows the
average fuel consumption since the
last reset.
• "Average" speed in MPH or km/h.
Shows the average speed since the
last reset.
• "Elapsed Time". Shows the total
time of travel since the last reset in
"hours:minutes: seconds." Elapsed
Time will increment when the
ignition device is in the RUN or
START position.
102
Press the multifunction switch
second and release to reset "Trip A" or
"Trip B".
"Trip B" is reset after each key on/key
off cycle.
button to
arrow
The "Fuel Economy" screen will display
the following:
Current Fuel Economy in MPG (US),
MPG (UK) or L/100km
Shows the current fuel economy.
During AutoStop stage performed by
the Start&Stop system (see "Normal
Starting of the Engine" in section
"Starting and Driving"), a dash will be
displayed instead of the value.

Range in miles or km

Shows the range since the last fuel
average reset.
When the fuel economy is reset, the
display will read "Reset" or show
dashes for two seconds.
Then, the history information will
for 1
be erased, and the averaging will
continue from the last fuel average
reading before the reset.
Fuel Economy Average in MPG (US),
MPG (UK) or L/100km
Shows the average fuel economy since
the last reset.
Press the multifunction switch
second and release it to reset the fuel
economy average.
When the fuel economy is reset, the
display will read "Reset" or show
dashes for two seconds.
Then, the history information will
be erased, and the averaging will
continue from the last fuel average
reading before the reset.
Press and release the
return to the main menu.
for 1
button to