DeWalt DCR011 Original Instructions Manual page 27

Track change buttons
3
Bluetooth® status indicator
4
Play/Pause button
5
Bluetooth® button
6
USB port
7
Handle and mobile phone cradle
8
Mobile phone tray
9
Date code
10
Intended Use
This D WALT Bluetooth® speaker is designed to play/stream
e
audio via a wireless Bluetooth® connection to a mobile phone or
other audio device.
DO nOT use under wet conditions or in the presence of
flammable liquids or gases.
DO nOT let children come into contact with the unit.
Supervision is required when inexperienced operators use
this unit.
Young children and the infirm. This appliance is not
•
intended for use by young children or infirm persons
without supervision.
• This product is not intended for use by persons (including
children) suffering from diminished physical, sensory or
mental abilities; lack of experience, knowledge or skills
unless they are supervised by a person responsible for their
safety. Children should never be left alone with this product.
USB Port (Fig. A)
The USB power output port 7
low power devices such as mobile phones, CD and MP3 players.
It delivers up to 2.1 amp total current.
As the speaker is powered by batteries, the USB power output
port will charge a device when the user presses the power
button to turn the speaker on.
nOTE: The audio device must connect to the speaker via
Bluetooth® to use the speaker function. The USB port is only a
power port for charging the audio device.
Handle/Mobile Phone Cradle (Fig. C)
The speaker should be transported using the handle
handle has a cradle which can be used to hold the mobile
phone while in use.

WARNING: A mobile phone cannot be secured in the
cradle and can fall if the speaker is moved or transported.
Be sure to remove mobile phone from the cradle before
moving or transporting the speaker.
Mobile Phone Tray (Fig. A)
The speaker has a mobile phone tray
hold the mobile phone while in use.

WARNING: A mobile phone cannot be secured in the tray
and can fall if the speaker is moved or transported. Be sure
to remove mobile phone from the tray before transporting
the speaker.
is a connection port for powering
8 . The
which can be used to
9
Mounting the Speaker (Fig. D)
The speaker is designed to be mountable or to sit upright
on a table or work surface. If mounting, use the mounting
slots 14 found on the bottom of the speaker as a template
for the location of the screws on the wood or wall. Mount the
speaker securely using drywall screws (purchased separately)
at least 25.4 mm long with a screw head diameter of 5–7 mm,
screwed into wood to an optimal depth leaving approximately
5.5 mm of the screw exposed. Align the slots on the back of the
speaker with the exposed screws and fully engage them in the
slots. The speaker can be mounted horizontally or vertically in
either direction.
ASSEMBLY AND ADJUSTMENTS

WARNING: To reduce the risk of serious personal
injury, turn unit off and disconnect battery pack
before cleaning, making any adjustments or
removing/installing attachments or accessories.
Inserting and Removing the Battery Pack
from the Bluetooth® Speaker (Fig. B)
nOTE: Make sure your battery pack
To Install the Battery Pack into the Speaker
1. Align the battery pack 11
battery port 13 .
2. Slide it in until the battery pack is firmly seated and ensure
that you hear the lock snap into place. Be sure that it does
not disengage.
To Remove the Battery Pack from the Speaker
1. Press the battery release button
battery pack out of the battery port.
2. Insert battery pack into the charger as described in the
charger section of this manual.
Fuel Gauge Battery Packs (Fig. B)
Some D WALT battery packs include a fuel gauge which
e
consists of three green LED lights that indicate the level of
charge remaining in the battery pack.
To actuate the fuel gauge, press and hold the fuel gauge button.
A combination of the three green LED lights will illuminate
designating the level of charge left. When the level of charge
in the battery is below the usable limit, the fuel gauge will not
illuminate and the battery will need to be recharged.
nOTE: The fuel gauge is only an indication of the charge left on
the battery pack. It does not indicate tool functionality and is
subject to variation based on product components, temperature
and end-user application.
OPERATION
Instructions for Use

WARNING: Always observe the safety instructions and
applicable regulations.

WARNING: To reduce the risk of serious personal
injury, turn unit off and disconnect battery pack
EngLIsh
11 is fully charged.
with the rails inside the speaker's
and firmly pull the
12
25