Pioneer CB009GMFILCFHD Service Manual page 113

3）Move the display board
3 Remove the 1) Remove the cover of
PCB
2) Remove the PCB from
4 Remove the 1) Remove the cover of
fan
capacitor 2) Disconnect the fan
3) Screw off the screw to
according to the arrow
direction to disassemble
it.
electronic control box
1) Pull out all the plugs
or connectors connected
to the PCB and remove
the ground wire after
remove the screw.
the electronic control
box
electronic control box
capacity wire.
remover it
Repeat the operation of step1 of No1
Repeat the operation of step1 of No1
Repeat the operation of step2 of No1
110
Press the four
fixing holders
from four
corners to
remove the
PCB
PCB
1 screw