Table of Contents
Advertisement
Available languages
Available languages
5.2. Pairing your device:
• Download the App to your phone.
• Create User Profile on App.
• Confirm phone's Bluetooth® is turned on.
• Open the App on your phone.
• Select "Dashboard" from the App's home screen.
• Confirm at least one blood pressure reading has been
taken and recorded on the monitor. This needs to
occur before the data can be transferred.
• Press and hold the POWER/START button on the
monitor for approx. 8 seconds or until the Bluetooth®
icon starts blinking.
• On the App press the "sync" button located on the
"Dashboard" screen.
• Data in monitor should successfully transfer over to
the App on your phone.
Setting up your blood pressure monitor:
Confirm the correct user is selected on your blood
pressure monitor:
• Confirm the user icon on the top right hand side of the
monitor screen is set to user 1 or 2.
• To change users on your monitor, see section 3.6.
5.3. Unpairing a device
• Delete the monitor pairing from your phone.
• Clear the phone pairing on blood pressure monitor.
• Press and hold the "START" button.
• The Bluetooth® icon will turn on and start blinking.
• "Pr" will appear in the bottom right hand corner of the screen.
• "CL" will appear, and then disappear in the top right corner.
• Once the letters disappear, the monitor has been successfully
cleared of all pairings. You can remove your finger from the
"START" button.
25
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the BP3GY1-2N and is the answer not in the manual?
Questions and answers
Tôi đã hủy kết nối Bluetooth sau đó kết nối lại máy không nhận xin cho giải pháp để kích hoạt bluetooth
To activate Bluetooth on the Microlife BP3GY1-2N after disconnecting and reconnecting:
1. Press and hold the power button on the monitor for 8 seconds or until the Bluetooth® icon starts flashing.
2. Ensure that at least one blood pressure reading is taken and recorded on the monitor before data transfer.
3. If no connection is made within 2 minutes, Bluetooth® will turn off automatically.
4. If connection issues persist, turn off the monitor, wait 1 minute, and try again.
5. On your device, open the Microlife Connected Health App, go to "Settings," and reattempt data download.
This answer is automatically generated
How to clear data
To clear all stored values on the Microlife BP3GY1-2N:
1. Hold down the "M" button until "CL" appears on the display, then release "M."
2. While "CL" is flashing, press "M" again to erase the values.
3. To cancel the clearing process, press the "STOP" button.
Note: Individual values cannot be cleared.
This answer is automatically generated