Isotra SCREEN HR7 Control And Maintenance Manual

SCREEN ROLLER BLINDS – HR7, LITE, GW

1. CONTROL

The roller blind was designed for use in both interior and exterior installations. The motor is protected against humidity,
protection class IP44. The roller blind is not intended for use in explosive atmospheres. The operating switch should be
installed indoors. It may, however, be installed outdoors, but only with corresponding protection against water penetration,
protecting all electric parts.
Power supply

Mains voltage: 230 V AC

Mains frequency: 50–60 Hz
 Voltage fluctuation tolerance: ± 10%

Level of disturbance: below 70 dB
Operating conditions
 Ambient temperature: -5 to +50 °C

Relative humidity: up to 5 g/m

Atmospheric conditions: E11, E12, E14, E15 acc. to EN 13561

Wind resistance *
 Motorised version – Class 3, Beaufort scale 6 (up to 49 km/h)
 Crank version – Class 0–2 (depending on the model)
Manual validity: 01.02.2021
3
and 75% (I2 Class)
CONTROL AND MAINTENANCE MANUAL