Configuration In Ibapda; Configuration In The I/O Manager - IBA ibaBM-DDCS Manual

9

Configuration in ibaPDA

Important note
If the firmware version of the ibaFOB-D card is older than V2.00 (build 172), first update
the firmware and then install the new version of the ibaPDA software. Please contact the
iba support.
9.1

Configuration in the I/O Manager

Find the appropriate link of the FOB-D card to which the ibaBM-DDCS is connected in
the I/O Manager. Click on the link with the right mouse button, which opens a submenu.
Select "Add module". Another submenu with all available devices will be displayed.
Select "ibaBM-DDCS" from this list. "ibaBM-DDCS" will now be shown below the link of
your ibaFOB-D card.
Figure 13: Adding the ibaBM-DDCS module
Tip
When the device has already been connected, select "Auto detect" in the context menu
or click on the <New configuration> icon. Then, the connected devices will be
automatically detected, the configured data will be read and the corresponding modules
will be entered in the I/O Manager.
32
Manual
Issue 1.11
ibaBM-DDCS