1. Manuals
  2. Brands
  3. Hanwha Techwin Manuals
  4. Network Hardware
  5. Wisenet XRN-6410DB4
  6. User manual

Hanwha Techwin Wisenet XRN-6410DB4 User Manual

Hide thumbs Also See for Wisenet XRN-6410DB4:
Table of Contents

Advertisement

Quick Links

Download this manual
NETWORK VIDEO RECORDER
User Manual
Wisenet NVR

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Wisenet XRN-6410DB4 and is the answer not in the manual?

Questions and answers

Related Manuals for Hanwha Techwin Wisenet XRN-6410DB4

Summary of Contents for Hanwha Techwin Wisenet XRN-6410DB4

  • Page 1 NETWORK VIDEO RECORDER User Manual Wisenet NVR...
  • Page 2 ™ Design and specifications are subject to change without prior notice. You can download the latest version from the Hanwha Techwin web site. (www.hanwha-security.com) ™ The initial administrator ID is “admin” and the password should be set when logging in for the first time.

  • Page 3: Important Safety Instructions

    • Monitor real time events that occur in Wisenet Recorder, sensors, and cameras or search through logs Before using this product, check if the latest version of this software is installed. Go to Hanwha Techwin's website (http://www.hanwha-security.com) to check the software version and download necessary files.
  • Page 4 overview cAution • RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS. • Do not ingest battery, Chemical Burn Hazard. • This product contains a coin / button cell battery. If the coin / button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death.

  • Page 5: Table Of Contents

    contentS overview Important Safety Instructions Real-Time Event Monitoring Check Event List Product User Manual Description Event Search Target Audience Event Instant Viewer How to Use the Product Contents Stop Alarm Output Camera Video Control getting StArted Capture Starting the system Instant Viewer Install Wizard Temperature Detection Mode...
  • Page 6 overview Ai SeArcH Screen Layout of the AI Search Setting the Device Storage Device Person Search Distributed Recording Face Search S.M.A.R.T Vehicle Search Monitor LP Search Text PlAy Setting the Network Screen Layout of the Play Interface Play Search Results DDNS Time Line Adjustment IP Filtering...
  • Page 7 live viewer SeArcH viewer Screen Layout of the Live Viewer Screen Layout of the Search Viewer Checking the System Status Time Search Checking User ID Text Search Checking Camera List Bookmark Search Checking the All Camera Status Search Results Export Live Status Record Status Ai SeArcH viewer...
  • Page 8 overview SetuP viewer exPort viewer 113 SEC Backup Viewer Screen Layout of the Setup Viewer 113 Recommended System Requirements Setting the Camera Camera Register 113 Screen Layout of the Backup Viewer Channel Setup 100 Camera Setup APPendix 115 Use Joystick 100 Profile Setup 115 Using Virtual Keyboard 101 Camera Password...

  • Page 9: Getting Started

    getti n g started StArting tHe SySteM inStAll wiZArd As shown below, proceed through each step of the <install wizard>. 1. Connect the power cable of the recorder to the wall outlet. Install Wizard can only be accessed at factory reset. If you do not want to proceed, click <exit>. 2.
  • Page 10 getti n g started Setting up the network 3. Set the administrator password on the <recorder id/Pw> screen and click the <next>. The network port can be used as a common port for camera and web viewer connection. If a product supports Click <...
  • Page 11 5. Set the date, time, time zone, and daylight saving time on the <date/time> screen, and then click the <next>. 7. On the <channel setup> screen, you can view the camera videos registered to each channel in thumbnails along with thumbnail information. To change the camera video position, select a video and drag and drop it to the desired location.

  • Page 12: Shutting Down The System

    getti n g started SHutting down tHe SySteM login To use the Recorder menu, you are required to login as a user that is authorized to access the applicable menu. 1. Select <Shutdown> at the top right of the screen. 1.

  • Page 13: Screen Layout Of The Live

    l i v e Shows the video of the camera connected to the recorder. Also, you can adjust the camera and check the network Item Description transfer status. Saves the recorded video of the selected channel in the designated path in a recorder or SEC Screen lAyout of tHe live format.

  • Page 14: Checking The System Status

    l i v e checking the System Status Item Description The icon at the top of the screen indicates the status of the system. It is displayed when an ISCSI device is disconnected. Only provided for products that support iSCSI. It is displayed when the network is overloaded.

  • Page 15: Check Camera List

    check camera list live Screen Menu Displays the camera type, status, and name registered in the recorder. After selecting the desired channel on the split mode, roll the mouse cursor over the screen to see the live screen menu. The live screen menu appears differently depending on the recorder operation status or the type of the registered camera.

  • Page 16: Icons On The Live Screen

    l i v e icons on the live Screen Item Description You can check the status or operation with the icons on the live screen. Events from the recorder and camera are displayed in icons. Event Display For details, refer to the "Setup > Setting the Event > Event rule setup" page The icons displayed on the screen may differ depending on the type of camera and the user's authority.

  • Page 17: Live Screen Mode

    live Screen Mode Each product may support different split view modes. You can display your camera's live video in various split modes. The 'Live4NVR' profile is added automatically with network camera auto registration, and settings can be changed according to user environment.

  • Page 18: Switching The Split Mode

    l i v e Switching the Split Mode Manual Switching Click at the bottom of the screen or enter a page number to go to that page. You can split the live video from cameras to Single, 4-split, 9-Split, or 16-split mode and watch them one by one. Each product supports different split modes.

  • Page 19: Osd Information Display

    oSd information display channel information display You can show or hide the recording status, camera status, event display, etc. in the video window. You can check the information of the video being recorded with each camera. To show or hide the OSD information, click < >...

  • Page 20: Check The Camera Status

    l i v e check the camera Status record Status If you select <record> in the <Status> menu, you can check the profile, record type, frame rate (Input/Record), You can check the status of all cameras connected to the recorder. and bit rate (Limit/Input/Record) for each channel.

  • Page 21: Channel Setting

    CH19 changing overall channel Aspect ratio network Status CH10 CH11 CH12 CH13 Select <network> in the <Status> menu to check the status of network bandwidth currently being received/ Video screen ratio for all channels can be changed in live split screen mode. transmitted.

  • Page 22: Full Screen Mode

    l i v e Setting uP tHe live lAyout full Screen Mode You can change to full screen mode, which has no top/bottom/left/right areas of the live screen. This section outlines how to select a series of channels based on their purpose/accessibility and monitor them in a single layout.

  • Page 23: Change Of Layout Channel And Name

    change of layout channel and name Play layout Sequence Play sequence> at the bottom of the layout list to automatically switch the layout according to the Click < 1. Click < > after selecting a layout. sequence settings. 2. Add or delete channels or rename layouts. 3.

  • Page 24: Real-Time Event Monitoring

    l i v e reAl-tiMe event Monitoring event Search You can browse events by camera and event type. Real-time events that occurred on the device can be checked in the live video window and event list. To search for a specific event, click < >...

  • Page 25: Event Instant Viewer

    event instant viewer cAMerA video control Select an event to check from the event list, and click < > to play the recorded video at the time the event By using the function icon of the video window, you can easily use the functions of capture, video zoom, PTZ camera and occurred.

  • Page 26: Instant Viewer

    l i v e instant viewer PtZ Mode You can move the video back 30 seconds and play it while live monitoring. Instant viewer plays video from 30 You can run PTZ control of the selected channel. seconds to 1 minute from the current time. Select the desired channel and click <...

  • Page 27: Digital Zoom

    digital Zoom display text You can zoom in or out the video via digital zoom. You can monitor texts regarding the sales record received from POS in real time. Select the desired channel and click < >. This is executable when a text device is connected. Enters the digital zoom mode.

  • Page 28: Change Channel Aspect Ratio

    Even if the connected network camera does not support the PTZ operations, you can configure the PTZ control settings (if possible) by installing the PTZ driver (physical device). It only supports a network camera with Hanwha Techwin's PTZ function and a camera registered in the ONVIF. PtZ control Menu You can use a single PTZ camera to perform the Pan, Tilt and Zoom operations to monitor multiple places, and configure the custom settings of the presets in a desired mode.

  • Page 29: Using Digital Ptz (D-Ptz) Function

    using digital PtZ (d-PtZ) function Item Description Zoom out/Zoom in 1. Register a camera that supports the D-PTZ profile. Activate the Zoom operation of the PTZ camera. In cameras that support the D-PTZ profile, you can use the D-PTZ function. Manual Focus You can adjust the focus manually.

  • Page 30: Running Preset

    l i v e exPorting tHe recorded video to delete a registered preset 1. Click < You can search the storage device to be exported and export the recorded video of the desired time by layout or channel. >. 2. Click < >.
  • Page 31 If you insert a USB memory stick with insufficient storage space, volume calculation may be disabled. Format the memory stick or delete some of the data on the memory stick to secure adequate storage space. The operation speed of the product may slow down if the export is in which is a progress. You can switch to the menu screen during export progress, but data playback will not be possible.

  • Page 32: Screen Layout Of The Search

    search search tiMe SeArcH You can search recorded video by various conditions such as time, event, and export. Screen lAyout of tHe SeArcH You can search the recorded data by the desired date and time conditions. The time displayed will be based on the time zone and daylight saving time (DST) applied time zone, so it may be displayed differently depending on whether the data time zone recorded at the same time and daylight saving time (DST) is applied.

  • Page 33: Event Search

    event SeArcH text SeArcH You can search for various events by channel. You can search the data input to the POS device connected to the recorder. 1. Select <event search> in the <Search>menu. 1. Select <text search> in the <Search> menu. 2.

  • Page 34: Export Search

    search exPort SeArcH Arb SeArcH You can search the exported data on the connected storage media. Only data saved in recorder file format when You can search auto-recovery backup data stored on ARB storage devices. exported will be retrieved. 1. Select <Arb search> in the <Search> menu. 1.

  • Page 35: Bookmark Search

    booKMArK SeArcH SMArt SeArcH You can search for bookmarked data. You can search for events by selecting a region of interest, an exclusive region, or a virtual line from a recorded video at a specific time. To use smart search, you need to set the area of the camera's “Motion Detection" or “IVA” to the entire area. However, if you want to search for cameras after Wisenet X series, you must select “Enable"...

  • Page 36: Ai Search

    AI search AI search PerSon SeArcH If there is AI data recorded by the camera, you can search for images in various conditions such as people, faces, and vehicles. In the recorded data, you can search for a person by any condition you want, such as gender, top/bottom color. Screen lAyout of tHe Ai SeArcH 1.

  • Page 37: Face Search

    fAce SeArcH veHicle SeArcH From the recorded data, you can search faces according to your desired conditions such as gender and age. You can search the vehicle by setting the vehicle type and color conditions from the recorded data. 1. Select <face search> in the <Ai search> menu. 1.

  • Page 38: Lp Search

    AI search lP SeArcH You can search for the license plate number recognized in the recorded data. 1. Select <lP search> in the <Ai search> menu. 2. Select a channel to search. If you select a channel to search, you can change the channel display mode by clicking < >.

  • Page 39: Play

    pl a y You can play the recorded data and export the video you want during playback. item Description Screen lAyout of tHe PlAy Select channel You can move by selecting a channel. Time line Move the playback position and display event data. You can change the number of channels displayed in the time line.

  • Page 40: Play Search Results

    pl a y PlAy SeArcH reSultS Play button name and function Paused state time line Adjustment You can move the playback position and zoom the time line in and out. • Click the desired play position in the time line. The playback start position will be moved.

  • Page 41: Search Results Export

    SeArcH reSultS exPort You can export the search results to a file. 1. Click the < > button. 2. Select a layout and channel to export. 3. Select a start date/time and an end date/time. If you changed the time zone of the device, select whether to apply DST. 4.

  • Page 42: Setup

    setup setup Setting tHe cAMerA Sets the camera, recording, event, device, network, and system environment. Screen lAyout of tHe SetuP You can access to the channel setup, camera settings, and profiles and camera password-related settings. Setting the channel You can register a network camera for each channel and make connection between. Setup >...
  • Page 43 When you change the camera ID/password in the camera web viewer, if the camera is already registered in Recorder, you also - Wisenet Multi-Channel : You can register Hanwha Techwin's multi directional cameras and multi-imager have to change the camera ID/password information registered in Recorder.
  • Page 44 setup if you want to check the error details of camera registration • Address type : Select an address type of the camera. The supported address type may differ depending on the type of the connected product. If you failed to register a camera, the reason for the failure will be displayed. • connection failed due to unknown error.

  • Page 45: Setting The Camera Functions

    Setting the camera functions network camera firmware upgrade You can set the camera while viewing the live video of the selected camera. Setup > camera > camera setup • Channel : Displays channel information. • Model : Displays the camera model information. • Current version : Displays the current camera firmware version.

  • Page 46: Setting The Profiles

    setup Setting the Profiles • SSNR : Adjusts the brightness by reducing noise and minimizing afterimages even in dark places. • Sens-up : Automatically adjusts the shutter speed according to the brightness of the current light. • IRIS/Lens : Adjusts the brightness by automatically or manually adjusting the camera IRIS and lens. Setting the recording Profile • AGC : Adjust the brightness by amplifying the camera's electrical signal when images are shot in the dark.
  • Page 47 Setting the live Profile Setting the remote Profile You can change the live transfer settings of the network camera. You can set the video profile transmitted to the network. Setup > camera > Profile > live Setup > camera > Profile > remote •...
  • Page 48 setup editing the Profiles dewarping Setup Press the <dewarping> button at the bottom of the <detailed profile configuration> window to go to the You can change the video settings of a registered network camera for each channel. distortion correction setup popup window for each channel. Setup >...
  • Page 49 How to set wiseStream dynamic gov/fPS setup Function to analyze the complexity of the video and effectively reduce the data size while maintaining the quality. Dynamic GOV can be used to automatically change the length of GOV depending on the video condition. For For details, refer to the camera's help or the product's user guide.

  • Page 50: Setting Camera Password

    setup Setting tHe recording Setting camera Password You can change the passwords of all registered cameras at once. You can setup scheduled recording, event recording and other recording related settings. You can register the camera’s ID and password. recording Schedule Setup >...

  • Page 51: Record Setup

    record Setup If a channel's data transfer exceeds defined allowed limit, then it may affect to other channels, and may force switching to <I-frame> recording even when the channel is configured to <FULL> recording mode. For Key Frame recording channels, the You can set the resolution and number of recordings for each channel when an event occurs or during a normal icon for limited recording appears on the live screen's top side.

  • Page 52: Setting The Event

    setup Setting tHe event Motion You can set the event-related settings such as whether or not an event is detected for each channel and whether an Setup > event > event setup > Motion alarm occurs event setup You can set whether or not to detect the detailed events (object detection, motion detection, intelligent video analytics, tampering) from the camera for each channel and details.
  • Page 53 tampering Setup > event > event setup > tampering Setup > event > event setup > ivA • Tampering : You can set whether to enable tampering detection. • IVA : You can set whether to enable intelligent video analytics. • Sensitivity : Sets the tampering detection sensitivity.

  • Page 54: Event Rule Setup

    setup event rule Setup • Event action : Displays the event action set in the event rule. Item Description You can set the event trigger and action rule to output an alarm when an event occurs. Setup > event > event rule setup PTZ preset setting Alarm output and beep setting E-mail recipient setting...

  • Page 55: Alarm Input

    Alarm input • Event action : Press <+ Add action> to set the event action. - PTZ Preset : Set the PTZ preset to be displayed when an event occurs. Click < > to set camera presets You can set the operation of the alarm sensor. for each channel.

  • Page 56: Schedule

    setup Schedule Setting tHe device When setting the event rule, you can set the operating time of the event action. You can make the detailed settings for devices such as storage device and monitors. Setup > event > Schedule Storage device You can set the storage device usage and check the setting status.
  • Page 57 • Storage Status : Displays the working status of a storage device. Click the <Status> to display the storage The ARB feature is available only when your video is saved in the SD card after registering your Wisenet camera using the status window.
  • Page 58 setup connecting the iScSi Adding an iScSi device This function is only available for products that support iSCSI. When connecting an iSCSI device to the recorder, you can search for the iSCSI device and connect and disconnect it. Setup > device> Storage device > iScSi 1.
  • Page 59 rAid mode setting Setup > device> Storage device > rAid This function is only available for products that support RAID. If you enable the RAID (Redundant Array of Independent Disks) mode, you can safely recover your data even if your system HDD is damaged.

  • Page 60: Distributed Recording

    setup distributed recording rAid mode setting 1. Click on the <use> or <Setup> button. This function is only available for products that support distributed recording. You can save recordings in a distributed manner by distributing HDD(s) of each group. 2. In the use RAID window, select settings of RAID and click on the < oK> button. • Use/Not Used : You can select whether or not to use the RAID mode.

  • Page 61: S.m.a.r.t

    S.M.A.r.t Monitor You can check the connection status and details of the hard disk mounted in the recorder. You can set the information displayed on the monitor as well as the output system. Setup > device> Storage device > S.M.A.r.t Setup >...
  • Page 62 setup expansion monitor settings display position settings This function is only available for products that support the use of an extended monitor. Some monitors many not display information (camera name, icon, time information, etc.) about the Recording, depending on the condition. Then, you can change the display position of the data. 1.

  • Page 63: Text

    text registering a text device You can set the POS device setting to send text information and text event information. device Settings You can make detailed settings for the POS device connected to the recorder. Setup > device > text > device • Device : Displays the text device name registered by the user.

  • Page 64: Setting The Network

    setup Setting tHe networK text event Settings You can set the text to receive an alarm when an event occurs. You can set various network functions, such as monitoring live video by connecting to a network from a remote location and receiving an event by e-mail.
  • Page 65 connecting and Setting the network • Setting the dHcP iP Address of the broadband router 1. To access the Broadband Router's configurations, open a web browser on the local PC that is connected to the Networking may differ from the connection method, check your environment before setting the connection mode. Broadband Router and enter the router's address (ex : http://192.168.1.1).

  • Page 66: Ddns

    setup ddnS to check Quick connect status A progress bar and its message appears for a Quick Connect. If a remote user accesses the network, you can set whether or not to use DDNS and the site to be connected. • Quick connect Success : Message for a successful connection.

  • Page 67: Ip Filtering

    iP filtering HttPS You can prepare the list of IP addresses to allow or block access to a specific IP address. You can choose a secured connection system or install a certificate. Setup > network > iP filtering Setup > network > HttPS • Filtering type • Secured Connection System : You can select a type of security connection system.

  • Page 68: 802.1X

    setup 802.1x e-mail When connecting to a network, you can select whether to use the 802.1x protocol and install a corresponding You can send an e-mail to a Recorder-registered user at a specific time interval, or if an event occurs. certificate.

  • Page 69: Snmp

    SnMP event Setting You can set the interval and type of the event that will be sent to the user. The SNMP protocol allows system or network administrators to remotely monitor and configure the network devices. Setup > network > e-mail > event Setup >...

  • Page 70: Dhcp Server

    setup dHcP Server check iP You can check the IP address assigned to the current DHCP server, MAC address, and the connected network You can set the internal DHCP server and assign an IP address to the network camera. port information. network Setting Setup >...
  • Page 71 to set troubleshooting in the case of standby mode • Device List/Status : Shows the status of the general recorder currently connected to the standby recorder. To 1. Set one recorder to <Standby> mode and the other recorder to <normal> mode. delete the general recorder connected, click <delete>...

  • Page 72: P2P

    setup Setting tHe SySteM This function is only available for products that support P2P. You can set the date, language, authority, etc. displayed when using the system, and query system information or log information. You can connect the recorder to Wisenet Mobile for easy use when using P2P service. Setup >...

  • Page 73: User

    user • Holiday : A user can select specific dates as holidays according to their own preferences. Select a holiday from the calendar displayed by clicking <Setup>. You can manage users, such as adding or deleting users and granting different authorities for each user. - The same applies to <recording Schedule>...
  • Page 74 setup user setting if you want to register a user You can create user groups and set authorities for each group. You can manage user information such as registering and deleting users in the created user group. Setup > System > user > user 1.
  • Page 75 Setting Permissions if the user has restricted access Set user's restricted access or network restriction. If a general user selects a menu to which they do not have access, an access restriction confirmation window will be displayed. If all rights are restricted, only the accessible menu of the live screen menu will be displayed, and only Items with restrictions will require logging in for use.

  • Page 76: System Management

    setup System Management to upgrade the current software version You can check the current system version and update to a new version, export data, setting initialization, and more. checking the System information You can check the current software version and MAC address before proceeding with the upgrade. Setup >...

  • Page 77: Log Information

    log information Settings You can export the information set in the recorder to a storage device and apply the same information to other You can check the log information related to system, events, and export. recorders. checking the system log Setup >...
  • Page 78 setup checking the event log checking the export log You can search recorded events including alarms, camera events and video loss. You can search the user who performed the export and the execution time and details (time, channel, device, file It also shows the log and its timestamp.

  • Page 79: What Is Web Viewer

    starti n g web vi e wer wHAt iS web viewer? connecting web viewer Web Viewer is a software program with which the operator can access a remote Recorder for real-time monitoring, PTZ 1. Open your web browser and type the IP address or URL of Recorder into the URL address box. control (if configured) or search.

  • Page 80: Install Wizard

    starti n g web vi e wer inStAll wiZArd 3. Set the network connection type and the connection environment on the <network> screen, and then click the <next> button. As shown below, proceed through each step of the <install wizard>. Install Wizard can only be accessed at factory reset.

  • Page 81: Live Viewer

    The ID of the connected user is displayed. Menu Click each menu to go to the corresponding menu screen. You are directly connected to the Hanwha Techwin homepage (www.hanwha-security.com). Select list of device/ Select to check the camera/event list. event Changes the color theme of Web Viewer.

  • Page 82: Checking The System Status

    l i v e vi e wer cHecKing tHe SySteM StAtuS cHecKing cAMerA liSt The icon at the top of the screen indicates the status of the system. Displays the camera type, status, and name registered in the recorder. Name Description live >...

  • Page 83: Checking The All Camera Status

    cHecKing tHe All cAMerA StAtuS network Status Click the < > button, followed by the <network> tab. You can check the status of all cameras connected to the recorder. You can check the status of network bandwidth currently being received/transmitted. live Status Click the <...

  • Page 84: Changing Overall Channel Aspect Ratio

    l i v e vi e wer cHAnging overAll cHAnnel ASPect rAtio full Screen Mode Video screen ratio for all channels can be changed in live split screen mode. You can change to full screen mode, which has no top/bottom/left/right areas of the live screen. Click <...

  • Page 85: Setting Up The Live Layout

    Setting uP tHe live lAyout change of layout channel and name This section outlines how to select a series of channels based on their purpose/accessibility and monitor them in a single 1. Click < > after selecting a layout. layout. 2.

  • Page 86: Real-Time Event Monitoring

    l i v e vi e wer reAl-tiMe event Monitoring check event list When new events occur, the list of events will be updated accordingly. Real-time events that occurred on the device can be checked in the live video window and event list. The specified channels and events are displayed in the list according to the event rule setup.

  • Page 87: Event Instant Viewer

    event instant viewer live Screen Menu Select an event to check from the event list, and click < > to play the recorded video at the time the event After selecting the desired channel on the split mode, roll the mouse cursor over the screen to see the live screen menu. occurred.

  • Page 88: Camera Video Control

    l i v e vi e wer cAMerA video control PtZ Mode You can run PTZ control of the selected channel. By using the function icon in the video window, you can easily enable functions such as screenshot, video rotation, and PTZ control.

  • Page 89: Performing Digital Zoom

    Performing digital Zoom PtZ control PtZ control Menu You can zoom in or out using the mouse wheel. If you scroll up using the mouse wheel, the selected video screen is enlarged by 10%, and a thumbnail window is If the connected network camera is a PTZ camera, the < >...

  • Page 90: Using Digital Ptz (D-Ptz) Function

    l i v e vi e wer using digital PtZ (d-PtZ) function running Preset 1. Register a camera that supports the D-PTZ profile. 1. Click < >. 2. Double-click the preset you want to run from the list. In cameras that support the D-PTZ profile, you can use the D-PTZ function. The camera lens moves to the set position.

  • Page 91: Screen Layout Of The Search Viewer

    search vi e wer You can search and play the recorded video stored in the recorder by connecting the recorder remotely. Name Description Screen lAyout of tHe SeArcH viewer Turns on/off the section setup. Saves the video of the selected channel in the designated path in AVI format. The date of the recorded video is displayed in orange, and the current date is displayed in a orange circle.

  • Page 92: Time Search

    search vi e wer tiMe SeArcH text SeArcH You can search the recorded data by the desired date and time conditions. You can search the data input to the POS device connected to the recorder. The time displayed will be based on the time zone and daylight saving time (DST) applied time zone, so it may be displayed differently depending on whether the data time zone recorded at the same time and daylight saving time (DST) is applied.

  • Page 93: Bookmark Search

    booKMArK SeArcH SeArcH reSultS exPort You can search for bookmarked data. Search results of events, texts and bookmarks can be exported to a file. example) bookmark search result export 1. Click < > in the search results list. 1. Select < >...

  • Page 94: Screen Layout Of The Ai Search Viewer

    AI search vi e wer AI search vi e wer PerSon SeArcH If there is AI data recorded by the camera, you can search for images in various conditions such as people, faces, and vehicles. In the recorded data, you can search for a person by any condition you want, such as gender, top/bottom color. Screen lAyout of tHe Ai SeArcH viewer 1.

  • Page 95: Face Search

    fAce SeArcH veHicle SeArcH From the recorded data, you can search faces according to your desired conditions such as gender and age. You can search the vehicle by setting the vehicle type and color conditions from the recorded data. 1. Select <face search> in the <Ai search> menu. 1.

  • Page 96: Lp Search

    AI search vi e wer lP SeArcH SeArcH reSultS exPort You can search for the license plate number recognized in the recorded data. Search results such as people, faces, and vehicles can be exported to a file. example) Person search results export 1.

  • Page 97: Play Search Results

    pl a y PlAy SeArcH reSultS exPort video by Section SetuP You can play the recorded data and export the video you want during playback. You can select the desired section from the time line or search list during video playing and export it to a file. 1.

  • Page 98: Play Button Name And Function

    pl a y Play button name and function Paused state Playback state Name Description Previous event Go to the previous event video. Step backward Move backward one frame Play Play the video. Step forward Moves forward one frame or more. Next event Go to the next event video.

  • Page 99: Setup Viewer

    setup vi e wer Setting tHe cAMerA You can configure the Recorder settings remotely on the network. Screen lAyout of tHe SetuP viewer You can check a list of cameras that are connected to the Recorder and configure the necessary settings. For details, refer to the "Setup >...

  • Page 100: Camera Setup

    setup vi e wer camera Setup Profile Setup You can change the settings of a connected network camera. You can set the profile for a network camera. Setup > camera > camera setup Setup > camera > Profile setup record You can set the recording profile for a network camera.

  • Page 101: Camera Password

    Setting tHe recording remote You can set the video profile transmitted to the network and the expansion monitor. For details, refer to the "Setup > Setting the recording" page in the Table of Contents. recording Schedule If you set a recording schedule for a specific date and time, the recording will start at that specific time. Setup >...

  • Page 102: Record Option

    setup vi e wer Setting tHe event record option For details, refer to the "Setup > Setting the event" page in the Table of Contents. You can set the hard disk recording option. You can set the recording duration separately for each channel. event Setup Setup >...

  • Page 103: Event Rule Setup

    Alarm input tampering detection You can change the tampering detection event setup. You can set the operation of the alarm sensor. Setup > event > Alarm input event rule Setup onvif Setup You can set the event trigger and action rule to output an alarm when an event occurs. Setup >...

  • Page 104: Schedule

    setup vi e wer Setting tHe device Schedule Whether to output an alarm can be scheduled according to the day and time. You can check a list of devices that are connected to the Recorder and configure the necessary settings. The initial setting will be an event sync, and an alarm will be sent only when an event occurs.

  • Page 105: Monitor

    rAid S.M.A.r.t You can set the RAID (Redundant Array of Independent Disks) mode. You can check the connection status and details of the hard disk mounted in the recorder. distributed recording Monitor By allocating a certain portion of HDDs to each group, you can distribute the amount of recording for optimal You can set the information displayed on the monitor as well as the output system.

  • Page 106: Text

    setup vi e wer Setting tHe networK text For details, refer to the "Setup > Setting the network" page in the Table of Contents. You can set the device text display and event text settings. Setup > device > text interface device A remote user can access the Recorder via the network to check the current mode and the IP address.

  • Page 107: Ddns

    ddnS HttPS You can set DDNS. You can select a security connection system or install public certificates. Setup > network > ddnS Setup > network > HttPS While using HTTPS, if you want to switch to HTTP, then abnormal operation can take place as the browser contains the setting iP filtering values.

  • Page 108: Snmp

    setup vi e wer e-mail recipient You can set groups and recipients to receive emails. You can specify the SMTP server that sends a mail if an event occurs and set the recipient group and users. Setup > network > e-mail SMtP You can set the server that sends mails and specify if you use the authentication process.

  • Page 109: Dhcp Server

    dHcP Server You can set the network camera IP address and check the details by setting up a DHCP server. This function is only available for products that support P2P. If you want to use P2P service, check the <enable P2P> box. Setup >...

  • Page 110: Setting The System

    setup vi e wer Setting tHe SySteM user You can manage users, such as adding or deleting users and granting different authorities for each user. You can configure the various settings of the Recorder system. For details, refer to the "Setup > Setting the System" page in the Table of Contents. Setup >...

  • Page 111: System Management

    Permission setup Settings You can set the user permission. Using a storage device, you can apply the current configuration of Recorder to another Recorder. Press the Initialization button to return the network settings to their factory default state. Items in the <exclusion Setting>...
  • Page 112 setup vi e wer event log The event log lists recorded events, such as sensor events, camera events, or image losses. export log You can search the user who performed the export and the execution time and details (time, channel, device, file type).

  • Page 113: Export Viewer

    export vi e wer Sec bAcKuP viewer Screen layout of the backup viewer You can play a file that is backed up in the format of SEC. f g h i Backup in SEC format produces backup data file, library file and self-executable viewer file. If you run the backup file viewer, the backup data file will be played.
  • Page 114 export vi e wer Name Description Saves the current video's image as in an image file. Supports JPEG file format. Screen Printout Prints out the current screen. You should have installed the appropriate printer driver before you can print out the screen. A toggle button.

  • Page 115: Appendix

    appendi x uSe JoySticK uSing virtuAl KeyboArd The function is only available for the product that supports a joystick. For products that support joy stick, see page 4 "Products supporting each feature” of the Product Specification Manual. The SPC-2000 joystick is operated as follows : 1.

  • Page 116: Troubleshooting

    appendi x troubleSHooting Problem Action Problem Action No video is played on the connected monitor. • Check if the necessary cables are connected to the monitor properly. Live video will be slow or cut off. • The frame number set for multiple data transmission set in camera or network • Some monitors do not support the Recorder output (HDMI1 or HDMI2).
  • Page 117 Problem Action Problem Action If I press the ESC key in full screen mode of the Web • Press the ALT+TAB keys to select 'ACTIVE MOVIE' and press the ESC key again. Frame rate of the actual recording does not match that of • If multiple profiles were applied to one camera for video transmission, the The system will switch to a normal split mode.

This manual is also suitable for:

Wisenet xrn-6410b4Wisenet xrn-3210b4

Table of Contents