MitraStar Movistar GPT-2541GNAC User Manual page 147

20.3 Wireless MAC Filter
Click Wireless > MAC Filter to open the MAC Filter screen. This screen allows you to configure the
Router to give exclusive access to specific devices (Allow) or exclude specific devices from accessing
the Router (Deny). Every Ethernet device has a unique MAC (Media Access Control) address
assigned at the factory. It consists of six pairs of hexadecimal characters, for example,
00:A0:C5:00:00:02. You need to know the MAC addresses of the devices to configure this screen.
Figure 93 Wireless MAC Filter
Table 86 Wireless MAC Filter
LABEL
Select SSID
MAC Restrict
Mode
MAC Address
Remove
Add
Chapter 20 Wireless
DESCRIPTION
Select an SSID for which to configure MAC filter settings.
Define the filter action for the list of MAC addresses in the MAC Address table.
Select Disabled to turn off MAC filtering.
Select Allow to permit access to the Router. MAC addresses not listed will be denied
access to the Router.
Select Deny to block access to the Router. MAC addresses not listed will be allowed to
access the Router.
This displays the MAC addresses of the wireless devices that are allowed or denied
access to the Router.
Select entries and click the Remove button to delete them.
Click this to add a new MAC address entry to the table.
147