Table of Contents
Advertisement
Before removing the USB board, follow these steps:
1.
Prepare the computer for disassembly (see
2.
Remove the bottom cover (see
3.
Remove the battery (see
Remove the USB board:
1.
Remove the two Phillips M2.0 × 4.0 screws (1) that secure the USB board to the computer.
2.
Lift the board up and turn it over to access the cable connected to the bottom (2).
3.
Disconnect the cable from the ZIF connector on the bottom of the board (3).
Reverse this procedure to install the USB board.
Touchpad
To remove the touchpad, use this procedure and illustration.
Table 5-9
Touchpad description and part number
Description
Touchpad, jet black
Touchpad, evening blue
Touchpad, natural silver
Touchpad, snowflake white
Touchpad, opulent aubergine
Touchpad, underwater teal
Touchpad cable
Before removing the touchpad, follow these steps:
42
Chapter 5 Removal and replacement procedures for authorized service provider parts
Preparation for disassembly on page
Bottom cover and rubber feet on page
Battery on page
34).
32).
32).
Spare part number
M50414-001
M50415-001
M50416-001
M50417-001
M59354-001
M59355-001
M50423-001
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the 17-cn0 Series and is the answer not in the manual?
Questions and answers
Sobre equipo dañado en lo estetico
For repairing aesthetic damage on an HP 17-cn0 Series laptop, the following replacement parts are available:
1. Top Cover Colors (Part Numbers):
- Jet Black: M50403-001
- Evening Blue: M50404-001
- Natural Silver: M50405-001
- Snowflake White: M50406-001
- Pale Gold: M50407-001
- Pale Rose Gold: M50408-001
2. Bezel Colors (Part Numbers):
- Standard: M50434-001
- Opulent Aubergine: M59352-001
- Underwater Teal: M59353-001
These parts can be replaced to restore or change the laptop's external appearance.
This answer is automatically generated