ISOFIX
To fix the child seat:
1. The ISOFIX lower fixing point is
on the joint between the second
row set backrest and the seat
cushion back. Its position can be
identified through the label on the
lower edge of the backrest. The
left and right seats are equipped
with a set of ISOFIX respectively.
2. Clear up the objects on the seat.
Note to remove the seat belt and
seat belt buckle to avoid affecting
accurate fixing of the child seat.
3. Put the child seat on the second
row seat.
4. Connect the fixing caliper on the
child seat to the on-vehicle fixing
device. Operate according to the
child seat instructions.
Seat and safety equipment 39
5. Connect the upper strap of the
child seat to the corresponding
fixing point of the vehicle. Refer to
the child seat instructions to get to
know when and how to strain the
upper strap. As shown in the
figure, the ISOFIX upper fixing
point is on the roof above the rear
seat. Open the outer cover from
the upper edge.
6. Push and pull the child seat in all
directions to make sure it is safely
secured.
7. Make sure that the child seat
temperature is not very high
before putting a child in the seat.
In case of a serious collision accident,
the ISOFIX may be damaged. It may
be necessary to repair and replace
some parts. Please check the ISOFIX
after a collision.
Need help?
Do you have a question about the Captiva CN202SR and is the answer not in the manual?
Questions and answers