Franklin MLB DELUXE RETURN TRAINER Assembly Instructions

Step 5:
Complete bottom frame by attaching (7) to (1) to (9) and (6) to (1) to (8).
7
Step 6:
Assemble (11) to (10). Center (13) on (1) and attach (12) to (13).
11
Step 7:
Line up holes on (3) and (7) and attach with butterfly screw. Repeat with (3) and (6).
Step 8:
Tighten "Infinite Angle" adjustment system. Spread out net and find red corner markers. Use
bungees to attach corners first. Then attach the remaining bungees in the following order: 4
on top, 6 on left, 4 on bottom, and 6 on right, spread evenly on each side. To attach bungees to
net, hold plastic ball in place and wrap free end around net, steel frame, and finally back
around plastic ball.
Bungee
Attachment
Step 9:
Attach target ribbon by weaving through net and tying off at ends.
WARNING: Use extreme caution when assembling the net to the frame. The bungee
cords are under extreme tension and must be attached carefully. Eye protection is strongly
recommended during assembly.
Franklin Sports Inc.
Stoughton, MA 02072
For replacements parts call
1-781-341-5178 or 1-800-225-8649
OR visit www.franklinsports.com
9
1
1
6
13
12
10
Ribbon
Attachment
Made in China
8