Related Manuals for Nauticam NA-a1
Summary of Contents for Nauticam NA-a1
-
Page 1: Table Of Contents
α NA - 1 For Sony Alpha 1 Mirrorless Digital Camera PN 17430 User Manual Housing FF-MIL Introduction Package Contents Important Instructions Part Names and Functions Opening the housing Closing the housing Preparation for Use Recommended Accessory Care/Storage Warranty Specifi cations... -
Page 2: Introduction
PACKAGE CONTENTS Make sure that you have all the included items listed below before using this product. If some items are missing or damaged, contact your local Nauticam dealer. NA- 1 α... -
Page 3: Important Instructions
O-ring renewal between the atmosphere and inside the and port change. housing. Only the accesories specifi ed by Use only Nauticam lubricant on silicone Nauticam must be used. Third-party rubber O-ring. accessories may result in malfunctions or damage to the product. -
Page 4: Part Names And Functions
PART NAMES AND FUNCTIONS Rear View C3 button Menu button Housing unlock button Fn button AEL/Image index button Multi selector Display button ISO button Control wheel - bottom Control wheel - left Moisture alarm window C4/Delete button Multi selector - center Control wheel - center... - Page 5 PART NAMES AND FUNCTIONS Top + Front Views M24 Accessory port Optical fi ber cable connection Focus mode lever Drive mode dial M14 Accessory port Main switch Mode dial C2 button Exposure compensation lock C1 button Exposure compensation dial Rear dial Accessory mounting ball AF illuminator/Visible light sensor Port lock safety button...
- Page 6 PART NAMES AND FUNCTIONS Back + Side Views Sacrifi cial Zinc Anodes 1/4” Threaded tripod holes Zoom/Focus dial Playback lever AF ON/Enlarge lever Shutter release lever Movie lever Front dial...
-
Page 7: Opening The Housing
OPENING THE HOUSING * drawings as illustrations only depress housing unlock button turn housing lock outward lift up the back housing... -
Page 8: Closing The Housing
CLOSING THE HOUSING * drawings as illustrations only before closing the housing, clean and lubricate the main O-ring make sure nothing is caught between front and back housing and that they are fully aligned before locking turn housing lock inward until you hear and feel it click into place housing locked in place securely... -
Page 9: Preparation For Use
PREPARATION FOR USE * drawings as illustrations only Installing the Camera - camera tray attachment 1 Choose monitor angle at your preference before attaching the camera tray onto the camera. Camera Tray position 1 - Tilted Monitor To obtain switchable VF/Monitor while diving with tilted monitor, please follow the below camera manual settings : Optional Camera Tray position 2 - Flat Monitor untighten the camera tray... - Page 10 PREPARATION FOR USE * drawings as illustrations only Installing the Camera - camera tray attachment 2 unlock camera tray lever and remove the tray from the housing fl ip open the monitor for camera tray position 1 attach the camera tray by tightening the tray screw into the tripod socket of the camera * lift up and turn the Focus lever each...
- Page 11 PREPARATION FOR USE * drawings as illustrations only Port Mounting depress safety button and rotate anti-clockwise lubricant the port O-ring before mounting align index mark push port assembly straight in rotate locking lever clockwise to lock...
- Page 12 PREPARATION FOR USE * drawings as illustrations only Coating housing O-ring Main O-ring remove the main O-ring using an O-ring remover clean the O-ring groove with a cloth and ensure that it is free from salt or other foreign materials lightly coat it with provided lubricant return the main O-ring by slowly pressing from one corner to the whole perimeter...
- Page 13 PREPARATION FOR USE * drawings as illustrations only Setting up moisture alarm CR2032 Battery Alarm ON/OFF remove battery press the battery down until it insulation fi lm click into place switch on the alarm test the alarm - the moisture alarm - connect the wires with a window will fl...
- Page 14 PREPARATION FOR USE * drawings as illustrations only Changing lens/port without opening the housing If using with vacuum valve : remove the cap from the vacuum valve and press the red button to release pressure before unlocking port lock If using without vacuum valve, please follow from step 2 unlock port lock and remove port assembly...
-
Page 15: Recommended Accessory
RECOMMENDED ACCESSORY * drawings as illustrations only Vacuum valve system remove the plug of M14 accessory port from the housing remove the cap from the vacuum valve hand pump slightly lubricate the o-ring and tighten the vacuum valve to the vacuum valve housing with the tool provided accesory port... -
Page 16: Care/Storage
CARE/STORAGE Soak the housing system in fresh water Operate all controls and buttons at after salt water usage least 3 times while immersed in fresh water We recommand cleaning and inspecting Protect the housing with robust and the main O-ring each time after diving for shock-proof travel case during trans- any damage and every time the housing portation. -
Page 17: Warranty
NAUTICAM accepts no liability for any damage to and defects in the housing caused by improper use and/or poor maintenance; it is the responsibility of the own- er to carefully follow the instructions in our manuals. -
Page 18: Specifi Cations
25086 M24 adaptor for HDMI 2.0 cable (incl. tightening tool) 25099 M24A2R200-M28A1R170 HDMI 2.0 Cable Monitor options 17922/S Nauticam Atomos Ninja V/V-S Housing for Atomos Ninja V 5” (excl. HDMI 2.0 cable) HDMI connectivity accessories ( 1.4 ) 25033 Standard HDMI bulkhead with M16 thread... - Page 19 Nauticam Internationl Ltd. Rm 2203, CCT Telecom Bldg, 11 Wo Shing St, Fo Tan, Hong Kong Tel. +852 - 26902711 Fax. +852 - 26909778 URL. www.nauticam.com Gallery. www.nauticam.smugmug.com...
Need help?
Do you have a question about the NA-a1 and is the answer not in the manual?
Questions and answers