Download Print this page

Lee Valley Tools XK651 Manual

Raised bed kit

Raised Bed Kit

(XK651)

The following instructions were provided by the manufacturer.

Building your Raised Planter

You will need to:

1. Clear and level the area you wish to build the planter

2. Cut the lumber for the top and bottom frames

3. Attach the brackets

4. Insert the patio stones

5. Fit the top frame and tighten all bolts

Saw

●

Tape measure

●

#2 square recess screwdriver

●

Square

●

Level

●

9/16" wrench

●

Table of Contents

Do you have a question about the XK651 and is the answer not in the manual?

Page 1 Raised Bed Kit (XK651) The following instructions were provided by the manufacturer. Building your Raised Planter You will need to: 1. Clear and level the area you wish to build the planter 2. Cut the lumber for the top and bottom frames 3.
Page 2 Step #1 To determine the 2 × 4 length for the short side, combine the total length of the patio stones (figure B) less 5" plus twice the patio stone thickness. As patio stones vary in thickness this formula should be used for ease of measuring.
Page 3 Leaving a 6" to 8" space between the soil and the top of the planter allows room for the seedlings to grow and be protected by plastic, glass or netting. ©Copyright 1998 to 2009 by Lee Valley Tools Ltd. and Veritas® Tools Inc. All rights reserved.